Unofficial Honda FIT Forums
45020 DCR G00 - This is what I want for my Fit. If someone can get me a great price for a set of these, PLEASE contact me.
45020 DCR G00 - This is what I want for my Fit. If someone can get me a great price for a set of these, PLEASE contact me.
0 2010/03/16 12:39:50
Disc Conversion
Disc Conversion
0 2009/08/04 11:52:49
This is how much the studs stick out...
This is how much the studs stick out...
0 2009/07/25 19:38:06
Completed installation with 3-mm wheel spacer and longer wheel studs.
Completed installation with 3-mm wheel spacer and longer wheel studs.
0 2009/07/25 19:37:08
End view of a Type-R caliper on the left and a Fit caliper on the right.
End view of a Type-R caliper on the left and a Fit caliper on the right.
0 2009/07/25 19:35:42
Type-R caliper on the left, Fit caliper on the right.
Type-R caliper on the left, Fit caliper on the right.
0 2009/07/25 19:34:14
21-mm for the stock size disc compared to 25-mm for the StopTech Type-R AeroRotor disc.
21-mm for the stock size disc compared to 25-mm for the StopTech Type-R AeroRotor disc.
0 2009/07/25 19:31:48
Side comparison of a StopTech stock replaement disc to a StopTech Type-R disc.
Side comparison of a StopTech stock replaement disc to a StopTech Type-R disc.
0 2009/07/25 19:30:18
This is the scrape mark from the caliper touching the inside of the wheel. This is why the 3-mm wheel spacers are needed (and longer studs). I did not rotate my 16-incher, so no marks on that wheel.
This is the scrape mark from the caliper touching the inside of the wheel. This is why the 3-mm wheel spacers are needed (and longer studs). I did not rotate my 16-incher, so no marks on that wheel.
0 2009/07/19 04:59:17
A gooder shot of the Type-R installation.
A gooder shot of the Type-R installation.
0 2009/07/19 04:58:32
Another view of the 15-inchers.
Another view of the 15-inchers.
0 2009/07/19 04:57:34
This is what it looks like under the stock 15" Sport wheel. Same problem here. The caliper just touches the inside of the wheel. Need the 3-mm spacers and longer studs...sigh!
This is what it looks like under the stock 15" Sport wheel. Same problem here. The caliper just touches the inside of the wheel. Need the 3-mm spacers and longer studs...sigh!
0 2009/07/19 04:56:04
This how it looks under a 16" accessory wheel. BUT, there is not room between the caliper and the wheel. Need to install 3-mm wheel spacers and longer studs...so close, yet so far!
This how it looks under a 16" accessory wheel. BUT, there is not room between the caliper and the wheel. Need to install 3-mm wheel spacers and longer studs...so close, yet so far!
0 2009/07/19 04:54:09
This is with the Axxis UTL pads and Type-R caliper. This caliper was gotten from http://store.zeckhausen.com/catalog/product_info.php?cPath=159_553_1550_1551&products_id=4349 for only $79! How is that for a cheap upgrade?
This is with the Axxis UTL pads and Type-R caliper. This caliper was gotten from http://store.zeckhausen.com/catalog/product_info.php?cPath=159_553_1550_1551&products_id=4349 for only $79! How is that for a cheap upgrade?
0 2009/07/19 04:51:58
This is with a StopTech full floating disc installed and Type-R caliper bracket. The StopTech discs are very nice with aluminum hat section (center). I got them from http://store.zeckhausen.com/catalog/product_info.php?cPath=159_553_1550_1552&products_id=4347 An even cheaper version would be to install Spoon discs http://www.spoonsports.us/ProductDetails.asp?ProductCode=45251-4H1014. I chose the StopTech ($450) because they are 25-mm wide and the Spoon ($197) is 23-mm wide. both discs are 282-mm in diameter. Stock diameter is 262-mm.
This is with a StopTech full floating disc installed and Type-R caliper bracket. The StopTech discs are very nice with aluminum hat section (center). I got them from http://store.zeckhausen.com/catalog/product_info.php?cPath=159_553_1550_1552&products_id=4347 An even cheaper version would be to install Spoon discs http://www.spoonsports.us/ProductDetails.asp?ProductCode=45251-4H1014. I chose the StopTech ($450) because they are 25-mm wide and the Spoon ($197) is 23-mm wide. both discs are 282-mm in diameter. Stock diameter is 262-mm.
0 2009/07/19 04:41:10
This is with a stock replacement StopTech sloted disc (P/N 126.40021SR). This was a huge upgrade over the stock pancakes. But this was still not enough for me. So,this is what I will upgrate to Type-R brake system. This is my start point.
This is with a stock replacement StopTech sloted disc (P/N 126.40021SR). This was a huge upgrade over the stock pancakes. But this was still not enough for me. So,this is what I will upgrate to Type-R brake system. This is my start point.
0 2009/07/19 04:35:58
This is from the back side so you can see that the caliper has to be removed from its original ears and move to the top one. Also the bottom bolt has to be removed from the lower caliper pin (caliper-to-bracket bolt) so it can be rotated out.
This is from the back side so you can see that the caliper has to be removed from its original ears and move to the top one. Also the bottom bolt has to be removed from the lower caliper pin (caliper-to-bracket bolt) so it can be rotated out.
0 2009/06/20 18:49:41
Since the caliper is rotated up and out (with the pads removed) a 6” C-clamp is used to hold the piston in while the system is bled. Notice that the caliper has to rotate far enough so the bleed bolt is above horizontal (facing upwards slightly).
Since the caliper is rotated up and out (with the pads removed) a 6” C-clamp is used to hold the piston in while the system is bled. Notice that the caliper has to rotate far enough so the bleed bolt is above horizontal (facing upwards slightly).
0 2009/06/20 18:43:22
left rear from inside
left rear from inside
0 2009/06/20 17:45:03
left rear, installed
left rear, installed
0 2009/06/20 17:41:46
left rear looking straight outboard. Notice how the bleed bolt faces down. I got 3/4 of the brake pedal sponge with the system bleeded from this position. See my photo album to how to bleed these brakes.
left rear looking straight outboard. Notice how the bleed bolt faces down. I got 3/4 of the brake pedal sponge with the system bleeded from this position. See my photo album to how to bleed these brakes.
0 2009/06/20 17:35:01
left rear from the inside, looking forward and left.
left rear from the inside, looking forward and left.
0 2009/06/20 17:31:32
left rear (without wheel) from the outside
left rear (without wheel) from the outside
0 2009/06/20 17:26:50
Switch from left side
Switch from left side
0 2009/06/20 16:34:39
IMG 1127
IMG 1127
1 2009/06/20 16:31:44
This is the washer that can be gotten from here http://www.mcmaster.com/#98040a107/=6tweos
This is the washer that can be gotten from here http://www.mcmaster.com/#98040a107/=6tweos
0 2010/04/26 10:12:02
This is the longer bolt that can be gotten from here http://www.mcmaster.com/#96144a297/=6twebn
This is the longer bolt that can be gotten from here http://www.mcmaster.com/#96144a297/=6twebn
0 2010/04/26 10:10:39
IMG 0245
IMG 0245
0 2009/06/19 11:47:39
IMG 0244
IMG 0244
0 2009/06/19 11:47:07
IMG 0243
IMG 0243
0 2009/06/19 11:46:39
IMG 0238
IMG 0238
0 2009/06/19 11:45:51
IMG 0237
IMG 0237
0 2009/06/19 11:44:03
IMG 0235
IMG 0235
2 2009/06/19 11:43:04
RS250Rsmall
RS250Rsmall
0 2009/06/19 11:10:46
188881
188881
0 2011/09/20 05:40:01
180000
180000
0 2011/09/20 05:40:01
Auto dimming mirror with visors down
Auto dimming mirror with visors down
0 2011/03/28 08:50:00
Auto dimming mirror with OET
Auto dimming mirror with OET
0 2011/03/28 08:49:05
150K
150K
0 2011/02/21 19:35:33
Under-Dash Fuse Box with arrows
Under-Dash Fuse Box with arrows
0 2011/01/05 17:14:59