Unofficial Honda FIT Forums
0 2019/05/09 14:20:55
0 2019/05/07 00:44:19
0 2019/05/03 12:59:14
The 3/8 copper allowed me to mount it to the intake manifold in a very neat and rattle-free manner
The 3/8 copper allowed me to mount it to the intake manifold in a very neat and rattle-free manner
0 2019/05/03 12:53:38
Not from honda fit
Not from honda fit
0 2019/04/28 14:21:16
0 2019/04/27 11:58:49
0 2019/04/24 09:48:17
Went with copper. Kinda lame, but I'll solder up the few fittings still undone and paint it. No more flopping around
Went with copper. Kinda lame, but I'll solder up the few fittings still undone and paint it. No more flopping around
0 2019/04/24 09:47:54
0 2019/04/22 13:20:30
Think im gonna delete these hardlines and substitute with rubbers. I could then route the hoses how I want.
Think im gonna delete these hardlines and substitute with rubbers. I could then route the hoses how I want.
0 2019/04/04 15:27:47
You can clearly see how uncertain I was of this chingaderas.
You can clearly see how uncertain I was of this chingaderas.
0 2019/04/04 15:26:05
Heres the coolant color. Keep in mine that the inside of the radiator is black and the reservoir.. well, the reservoir is young enough to still show the proper color.
Heres the coolant color. Keep in mine that the inside of the radiator is black and the reservoir.. well, the reservoir is young enough to still show the proper color.
0 2019/03/01 16:05:56
Heres the single bolt holding it in place. Can slide the reservoir up if you want to get a better look.
Heres the single bolt holding it in place. Can slide the reservoir up if you want to get a better look.
0 2019/03/01 16:03:40
Theres your coolant reservoir. Based upon the perspective shown in the image you can see your coolant level on the lower left side.
Theres your coolant reservoir. Based upon the perspective shown in the image you can see your coolant level on the lower left side.
0 2019/03/01 16:02:03
0 2019/02/20 13:04:43
0 2019/02/20 13:04:18
0 2019/02/20 13:03:53
0 2019/02/20 13:03:34
0 2019/02/20 13:02:16
0 2019/02/20 13:01:08
Which are also screw in, you can apply the jaws of the pliers beneath the plastic "washer" to apply some towards-you style pressure n unscrew it.
Which are also screw in, you can apply the jaws of the pliers beneath the plastic "washer" to apply some towards-you style pressure n unscrew it.
0 2019/02/19 14:51:39
Also OEM P/N
Also OEM P/N
0 2019/02/18 19:44:59
0 2019/02/18 19:40:57
AKA the "pcv 2.0" Paired with my hasty temporary install. Theres some words behind how this works and why its useful in our thread over in the GE section. Designed by J's Racing, copied by some dudes on ebay. 120 bucks vs. ~600 via j's.. Link time.
AKA the "pcv 2.0" Paired with my hasty temporary install. Theres some words behind how this works and why its useful in our thread over in the GE section. Designed by J's Racing, copied by some dudes on ebay. 120 bucks vs. ~600 via j's.. Link time.
0 2019/02/17 10:44:34
Splitter. Im sure all our stock ones are thrashes
Splitter. Im sure all our stock ones are thrashes
0 2019/02/17 10:19:45
0 2019/02/17 10:08:59
Front grill
Front grill
0 2019/02/17 09:59:20
Rear diffuser
Rear diffuser
0 2019/02/17 09:58:25
Door panel
Door panel
0 2019/02/17 09:57:51
Center console
Center console
0 2019/02/17 09:57:23
0 2019/02/14 17:25:24
Ring on one side, demale quik disconnect on the other. Rings to the battery, and the other to the male terminals on an injector, listen for the click. Could also put a little seafoam, techron, whatever in the top of the injector before energizing and you'll be able to see the atomization for yourself.
Ring on one side, demale quik disconnect on the other. Rings to the battery, and the other to the male terminals on an injector, listen for the click. Could also put a little seafoam, techron, whatever in the top of the injector before energizing and you'll be able to see the atomization for yourself.
0 2019/02/14 10:59:05
Used some double sided 3m to affix a rubber bushing so it didnt rattle on the airbox
Used some double sided 3m to affix a rubber bushing so it didnt rattle on the airbox
0 2019/02/10 15:56:41
0 2019/02/10 15:55:02
I didnt want to kink it. Itll be re-routed later when I find a better path. This method seemed the least hilarious.
I didnt want to kink it. Itll be re-routed later when I find a better path. This method seemed the least hilarious.
0 2019/02/10 15:54:21
This is the only pic i found for it where im confident its the GE.
This is the only pic i found for it where im confident its the GE.
0 2019/02/08 17:20:00
0 2019/02/08 17:18:59
0 2019/02/06 13:36:53
0 2019/02/06 13:14:48
0 2019/02/06 13:14:00