Fit turbo kit

B.A.M. · #1 (**permalink**) 08-10-2009, 06:33 PM

I am new to this forum and i do custom fabrication work with metal. I have had a couple people ask me to weld their cracked turbo manifolds for the fit. Its a temporary fix because they have been cast. basically i would like to know if there is a market for a turbo manifold to be fabricated for the honda fit. I would do it tubular using schedule 40 steel. I also want to know if there is what size turbo is desired? the feedback would be appreciated. I have inquired about vendor status. just depends if it is something desired for fit drivers. I would aslo be able to provide i.c. and piping. so please let me know. thank you

rvall004 · #2 (**permalink**) 08-11-2009, 01:41 AM

im intrested...turbo size t25..let me know...also intrested in the ic pipes

B.A.M. · #3 (**permalink**) 08-11-2009, 12:09 PM

i will take pics and show my step by step fab as i start all the way to the finish. hopefully i will be able to drum up more interest in the kit. i would be providing manifold, i.c., i.c. piping, bov, turbo, oil lines and downpipe. the d.p. will bolt up to stock catback. The parts will be able to be purchased separately or as a kit. The fuel and tuning will not b up to me. I like to stick to what i know how to do

rvall004 · #4 (**permalink**) 08-11-2009, 12:39 PM

all i need is the manifold and down pipe

B.A.M. · #5 (**permalink**) 08-11-2009, 02:51 PM

i can def. do the manifold and the d.p. check your pm

keepitpg · #6 (**permalink**) 08-11-2009, 03:22 PM

im interested..

B.A.M. · #7 (**permalink**) 08-11-2009, 05:43 PM

Quote:

Originally Posted by keepitpg

im interested..

would you just be interested in the manifold and d.p. only also or an entire kit? i have a mandrel bender and can bend steel and aluminum. so i could offer the i.c. piping also. i do understand that people like piecing together their own kits also. so if the way to go is just manifold and d.p. then thats what i will work on. thanks so far on the input.

keepitpg · #8 (**permalink**) 08-11-2009, 05:45 PM

i'd be interested in maybe manifold and d.p.

B.A.M. · #9 (**permalink**) 08-12-2009, 03:06 PM

im going to make a whole kit and i will price according for individual pieces.

B.A.M. · #10 (**permalink**) 08-12-2009, 03:11 PM

here is a job that we did just so you can see

tt jeep srt8

only the turbos and wastegates were brought to us

FitFlowjoe · #11 (**permalink**) 08-12-2009, 03:31 PM

Ok I know you are talking about turbo stuff only...

But how about a long tube header.. like say something like the J's Racing or the FEEL's header??

Tried to find a picture of the Header from FEELS but can't.. But I can get an idea from the J's Racing piece

FitFlowjoe · #12 (**permalink**) 08-12-2009, 03:32 PM

Nice turbo set-up by the way...

B.A.M. · #13 (**permalink**) 08-14-2009, 10:51 AM

Quote:

Originally Posted by FitFlowjoe

Ok I know you are talking about turbo stuff only...

But how about a long tube header.. like say something like the J's Racing or the FEEL's header??

Tried to find a picture of the Header from FEELS but can't.. But I can get an idea from the J's Racing piece

not able to find pics of those two headers...... you have a pic or link or something?

FitFlowjoe · #14 (**permalink**) 08-19-2009, 07:43 PM

Quote:

Originally Posted by B.A.M.

not able to find pics of those two headers...... you have a pic or link or something?

Sorry for the long time to answer back but here is the link the J's racing piece:

A&J Racing*::*Engine*::*Headers*::*J's Racing Header - Honda Fit/Jazz 06-08 (GD3/GD4)

I want to know if something like this can be made for cheaper...

FitFlowjoe · #15 (**permalink**) 08-19-2009, 07:44 PM

Also if you send me a PM with your e-mail I can send u a pic of the FEEL's Header which is even more badass