Lol the funny thing is that those exact lights are in my computer right now. I thinking about removing them and putting them in my car because i never use them in my computer anyway. The more I think about it the more I want to.
__________________
2007 Black Pearl Honda Fit A/T
Stock so far =[
I'll probably put a one on each side of the front and two in the rear. I found some at Super Bright LEDs - Car Accents
I'll probably run them off the illumination wire off the radio so they turn on with the parking lights. I'll post some pics when I get them done. Nice diy by the way!
Thanks for the great DIY, I just finished mine and I'm happy to say it's my first mod ever. I just need to secure the cables when I can find some electrical tape >_>.
Maybe a mini-guide on removing the bottom panel would help. I was getting frustrated trying to work with the little room there is in the fuse box. Other than that, its awesome and it looks great. Thank you!
Crappy quality pictures, but I took them on my phone
If you blow a fuse when your playing with the new lights, It's the "backup" fuse under the hood. Much thanks to this thread
Just to reiterate: This fuse is UNDER THE HOOD, not under your dash/steering-wheel area. Just blew the fuse by accident with an ampmeter (I'm a noob :P), and was friggin looking for the backup fuse in the under-dash fuse box. Then I was like, "what the heck, this 'backup light' fuse is fine, what about..... OHHHH. " :P
This is seriously gonna be my first mod. I'm trying to decide between the 4" colds, or an LED strip. The Oznium kit says it includes 2 tubes and the transformer for $7.99. FlowLighting Cold Cathode Kits You can't beat that!
Question #1: Has anyone installed cold cathodes, and think that they're too bright? (If so, I'll got to an LED strip.)
Question #2: Anybody have any lighting installed on their pillars, especially the ones in the back? (Either the back seat, or the cargo area).
This is seriously gonna be my first mod. I'm trying to decide between the 4" colds, or an LED strip. The Oznium kit says it includes 2 tubes and the transformer for $7.99. FlowLighting Cold Cathode Kits You can't beat that!
Thanks.
Is 4 inches enough? I've asked myself that several times XD
Seriously though, All the other pictures show strips going across the entire thing.
__________________
2008 VBP Honda Fit Sport A/T
BONE STOCK WHAT WHAT
"You should take a short walk on a LONG PIER"-Crazy Steve
That's pretty funny CM. Hey, you on a 7 - 2 somewhere?
As for the lights, I bought the 4"ers, and decided to put them in my Mazda first. I'm a little scared of those exploding bags in the Fit. After I get them installed there, then I'll decide whether the ones for the Fit need to be brighter.
well, since my GF lets me mod her Fit (she just doesn't want me to get crazy) I decided to do the footwell lighting.
It was a PIA. I was not able to get my 14 gauge jumper wires to stick. So I just stuck in the 10 gauge wires from my LED strips (Pilot 10" LED strips from Pep Boys/ $19.99 each). I ran the wires underneather the paneling. So you cant see it. It came out pretty good. But took me longer than I expected.
Here's the pics:
BIG THANKS to jlor for the DIY info.
__________________
doesn't own a fit per say. but its in my garage.
Right on, so anyone wire this to the dash lights? So you can possibly dim em with the dash n stuff? If not, think I'll have to start lookin at wiring diagrams lol./
the footwell lights in my merc are on with the instrument/ dash lights.
but its dim.
i think he want to have a way to turn it on so if you drop something you can find it.
i am trying to figure a way to wire up a switch for them. but im lazy.
oznium.com has switches... it's easy. connect the wire to the fuse or battery. somewhere between the wire and the light, cut it, and connect them both the switch... "power on, power off"
yea, I'd just like a way to turn em on/off whenever and dim.
I don't think it'd be all that dangerous while driving though...? lol, not like my feet are that amazing that I'ma stare at em while going through town.
__________________
yumminess
1993 Buick LeSabre - most comfy car...ever.
2008 Honda Fit - funnest and most versatile car...prolly ever.
Can't see why you'd want these lights on with the dash lights, that means they will be on while driving at night which would be dangerous.
I installed a switch on mine under the steering wheel, I actually did it because I didnt want the lights on during the day but at night I flip the switch and drive with them on, It actually helped to keep me awake during that 17 hour drive from florida back home to texas. For anyone interested I can go back and do a write up real quick on how to wire this.
__________________ San Antonio, TX
2008 Tidewater Blue Fit Sport
SSR Intake
PIAA Xtreme White Plus H4
Under dash cathodes
35% front tint, 5% all other
Ok to answer a few questions, yes the lights will stay on as long as the key is turned to the first position and you have the switch on. So it pretty much functions like a regular accessory. Plus you wont have to worry about running down your battery if you forget to turn them off. And 2. I will do a DIY tomorrow since I am off. If I get sometime today I'll try to work on a wiring diagram to get yall started.
__________________ San Antonio, TX
2008 Tidewater Blue Fit Sport
SSR Intake
PIAA Xtreme White Plus H4
Under dash cathodes
35% front tint, 5% all other
lol./
San Antonio, TX
Linear Mode
