Misfire but this is not a coil pack issue. Grounding issue.
Thread Starter
|
New Member
Joined: Sep 2022
Posts: 4
From: Wintersville
Misfire but this is not a coil pack issue. Grounding issue.
Got misfire on cylinder #4. Found 12v on battery but only 9.4v on all coil packs.
Check positive coil to battery negative = 12v.
Coil negative to battery positive = 9.4v
Figured loosing 3v to high resistance ground/corroded wires.
Trying to find where the negative coils link together to go to ground.
Any wiring schematics or factory ground locations would be helpful.
Check positive coil to battery negative = 12v.
Coil negative to battery positive = 9.4v
Figured loosing 3v to high resistance ground/corroded wires.
Trying to find where the negative coils link together to go to ground.
Any wiring schematics or factory ground locations would be helpful.
Thread
Thread Starter
Forum
Replies
Last Post
Letsclique
1st Generation (GD 01-08)
3
Feb 28, 2015 01:02 PM
Mtwalenciak
2nd Generation (GE 08-13)
14
Dec 23, 2014 10:04 AM
earthcurve
Fit DIY: Repair & Maintenance
2
Aug 20, 2013 05:59 AM
Mr_Kunio
1st Generation (GD 01-08)
11
Aug 10, 2011 12:33 AM