1st Generation (GD 01-08) The one that started it all! Generation specific talk and questions here!

What did you do to the GD Fit today?

Thread Tools
 
Search this Thread
 
  #5641  
Old 08-03-2012, 04:56 PM
EightyFour's Avatar
Member
5 Year Member
iTrader: (4)
Join Date: Jan 2007
Location: NoVA
Posts: 771
Was driving this morning on my way to meet up a friend and as I was coming off of a red light, my clutch felt weird. After engaging in second gear, I was no long able to shift out into other gears. I pulled over and tried to run through the gears and was unable to. When I turn off my car though, I'm able to without much problem but when it's running, I can't.

I managed to drive to my local mechanic to get it checked out and he said that the clutch was going to have to be replaced. What the hell?

I drive my car (GD3 with under 60k miles) like a baby and don't race at all. This is also the third MT car I've owned so I honestly don't believe that it's my driving habit at all. Did anyone else have this problem?

I looked around a little on the forums and it seemed like a few of you guys did. Are the clutches in the Honda Fits faulty? My old civic was well into the 100k miles and never had any problems...
 
  #5642  
Old 08-05-2012, 02:34 AM
billboard's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: May 2011
Location: Spokane
Posts: 172
installed c-pillar bar i purchased from Un_Fit


cut the plastic seatbelt bolt cover, cause i didnt want to leave it off...
Name:  cpillar2.jpg
Views: 195
Size:  150.1 KB

Name:  cpillar.jpg
Views: 159
Size:  86.8 KB

Name:  cpillar1.jpg
Views: 142
Size:  117.5 KB
 
  #5643  
Old 08-05-2012, 02:55 AM
CTS4MATION's Avatar
Member
Join Date: Aug 2012
Location: SW PA
Posts: 83
Billboard,

Looks really clean man, nice job!
 
  #5644  
Old 08-05-2012, 12:07 PM
dtfdanyo's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Feb 2011
Location: Houston
Posts: 242
notice any difference with that bar?

I had one on my S14 and it didn't creak as much going up driveways and what not.
 
  #5645  
Old 08-05-2012, 01:57 PM
icollins247's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: Aug 2011
Location: Glenwood, Iowa
Posts: 23
After being parked for the last two months in my cluttered garage. I finally cleaned it out and added some shoo accessories. Since it is an apartment garage I have to make due with what I can. I added some shop lighting and a new Shop Vac.

That left me with plenty of room to begin removal of the exhaust manifold and catalytic converter to make room for my T1R header and test pipe. It will be a great addition to my Skunk2 Mega Power cat-back exhaust! =)
 
  #5646  
Old 08-05-2012, 07:06 PM
billboard's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: May 2011
Location: Spokane
Posts: 172
Originally Posted by CTS4MATION
Billboard,

Looks really clean man, nice job!
thanks dude, appreciate it.

Originally Posted by dtfdanyo
notice any difference with that bar?

I had one on my S14 and it didn't creak as much going up driveways and what not.
i havent really noticed any difference to be honest...
 
  #5647  
Old 08-07-2012, 04:49 AM
Remould's Avatar
Member
Join Date: Jan 2012
Location: Surrey, United Kingdom
Posts: 70
I picked up a couple of bargains last weekend.

A new and unused Spoon Sports Venturi Throttle Body and a 2nd hand Mugen Short Shifter (worth almost £700 in total) which i picked up for just £100!

Spoon Sports Venturi Throttle Body:
Name:  IMAG0248-1.jpg
Views: 162
Size:  103.4 KB

Mugen Short Shifter:


I fitted the Spoon Sports Venturi Throttle Body at lunchtime yesterday, but as i ran out of time, I had to wait for my drive home to test it out.
I wasn't too sure what to expect from the new unit (as the throttle opening is still the same size), but i'm really quite pleased with it. Throttle response has improved considerably, when you blip the throttle, the engine picks up immediately. Mid-range power seems a little better too, however i can't feel much of a difference at high revs.
I would say it's a definitely a worthwhile mod, especially with the bargain price i got it for.


This morning i got to work early to fit my Mugen Short Shifter.
It was a quick and easy mod to perform, think i had everything stripped out and refitted within 30 minutes...


Comparison of OEM (Left) vs Mugen (Right):

Name:  IMAG0250-1.jpg
Views: 171
Size:  72.3 KB


Before (with OEM Shifter):

Name:  IMAG0175-1.jpg
Views: 206
Size:  48.6 KB


... and after (with the Mugen Short Shifter installed):

Name:  IMAG0251-1.jpg
Views: 179
Size:  67.6 KB
 
  #5648  
Old 08-07-2012, 11:08 AM
Glockbag's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Mar 2008
Location: Chicago, IL.
Posts: 147
fired her up after the heart transplant
 
  #5649  
Old 08-07-2012, 11:28 AM
dtfdanyo's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Feb 2011
Location: Houston
Posts: 242
Nice shifter! I have the Revo and it makes a huge difference! And nice knob too, I have the same one
 
  #5650  
Old 08-07-2012, 12:25 PM
Steezo's Avatar
Banned
5 Year Member
Join Date: Aug 2007
Location: Chesapeake, VA
Posts: 334
engine light came on for the first time yesterday while driving home from work.
I just took into Honda this morning and luckily its just my CAT converter that's going bad, WHEWWWWWWWWWWWWWWWWWW. But they had to order the part and it wont be in for a few days...at least its all free!!! its covered under the 8yr/80k mi w00t w00t
 
  #5651  
Old 08-07-2012, 06:53 PM
MNfit's Avatar
Super Moderator
iTrader: (8)
Join Date: Oct 2007
Location: Minnesota
Posts: 3,379
went out to the garage, looked at the car and got pissed off/depressed its not running then went back inside.

I did poke around some more. Not 100% sure I am using the volt meter correctly but it seems like everything is working. Also looking through the service book I don't need to drop the tank to get to the fuel pump, whew.

I will probable pull the driver seat out tomorrow and see if I cant get the pump out, or maybe not lol
 
  #5652  
Old 08-08-2012, 10:47 PM
Hootie's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Mar 2008
Location: South of Heaven
Posts: 5,034
^^ Nah you shouldn't have to drop the tank, just remove the center console and there should be an access plate to the fuel tank for the pump. (Going from memory here)

Today, I finally ditched the 205/55R15s. Mounted and balanced a set of 195/55R15 Yokohama AVID ENVigors at work. Was too cheap to have a tire shop do it... PLUS the last time a tire shop mounted new tires on my GD they over tightened the lug nuts which in turn caused my brake rotors to warp. -.-
 
  #5653  
Old 08-09-2012, 09:04 AM
Perrenoud Fit's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Unhappy When it rains it pours, in the Fit!!

I found the drivers side, front and back damp yesterday and the rear passenger's. From what I have found here @ FF it's the plastic water shield between the door and door panel. who has had this and did the new plastic barrier fix it? Any input would be appreciated .
Thank-ya
 
  #5654  
Old 08-09-2012, 09:21 AM
BlueCell's Avatar
Member
5 Year Member
iTrader: (4)
Join Date: May 2007
Location: Yeehaw!
Posts: 2,847
Originally Posted by Perrenoud Fit
I found the drivers side, front and back damp yesterday and the rear passenger's. From what I have found here @ FF it's the plastic water shield between the door and door panel. who has had this and did the new plastic barrier fix it? Any input would be appreciated .
Thank-ya
I pretty much don't have mine anymore, it's not really needed. There's another issue at hand.
 
  #5655  
Old 08-09-2012, 12:04 PM
Perrenoud Fit's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Originally Posted by BlueCell
I pretty much don't have mine anymore, it's not really needed. There's another issue at hand.
What is that???? "pretty much don't have mine anymore" the leaks or that assume Fit? Ur in HondaTuner this month right?
Thanks for ur reply BC
Mike
 
  #5656  
Old 08-09-2012, 12:29 PM
BlueCell's Avatar
Member
5 Year Member
iTrader: (4)
Join Date: May 2007
Location: Yeehaw!
Posts: 2,847
I don't have the plastics on the inner doors.
And yes I'm in HT this month. Available online as well
 
  #5657  
Old 08-09-2012, 01:35 PM
Steezo's Avatar
Banned
5 Year Member
Join Date: Aug 2007
Location: Chesapeake, VA
Posts: 334
nice writeup!
 
  #5658  
Old 08-14-2012, 12:36 PM
MNfit's Avatar
Super Moderator
iTrader: (8)
Join Date: Oct 2007
Location: Minnesota
Posts: 3,379
pulled the fuel pump out and had it tested, its still good. now I'm stumped its back to square one. I really hate trying to test electrical shit
 
  #5659  
Old 08-14-2012, 01:13 PM
Dean's Avatar
Member
5 Year Member
Join Date: Mar 2010
Location: Southwest Ohio
Posts: 191
Full detail...

Spent a few hours Saturday giving the car a full day spa treatment...

 
  #5660  
Old 08-14-2012, 01:15 PM
Previc93's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Jul 2007
Location: GILBERT AZ
Posts: 1,127
Originally Posted by MNfit
pulled the fuel pump out and had it tested, its still good. now I'm stumped its back to square one. I really hate trying to test electrical shit
Check the power and ground wires to the fuel pump. If those wires are good then its the pump. If those wires are bad.. could be a number of things. Wiring, fuses, computer, ect....
 


Quick Reply: What did you do to the GD Fit today?



All times are GMT -4. The time now is 01:00 AM.