What did you do to the GD Fit today?
#7561
Yes sir. They work perfectly.
2002-2006 RSX base model - brake pads
2002-2003 Civic SI - rotors
It helps looking for these applications sometimes for getting better pads or rotors.
2002-2006 RSX base model - brake pads
2002-2003 Civic SI - rotors
It helps looking for these applications sometimes for getting better pads or rotors.
#7562
Just ran what may be my last autocross event of the year. Had a lot of fun despite it raining all day and the having charge issues with my Go Pro (didn't stay on long enough to record video).
Here are today's final RAW time results.
Final Raw Time Results
Here are today's final RAW time results.
Final Raw Time Results
#7564
The last 2 weekends were good.
- Add full contact camber shims to the rear.
- Dialed the camber in. Front -3.3*, Rear -2.8*
- Brake flush.
- Oil change.
- Adjusted coil over perch. The lower perch came loose making the sway bar linkage end go into the tire. Caught it in time before any damage was done.
Next week the car goes back to stock for smog.
- Add full contact camber shims to the rear.
- Dialed the camber in. Front -3.3*, Rear -2.8*
- Brake flush.
- Oil change.
- Adjusted coil over perch. The lower perch came loose making the sway bar linkage end go into the tire. Caught it in time before any damage was done.
Next week the car goes back to stock for smog.
#7567
And after smog you will install that turbo kit you are about to purchase.
The last 2 weekends were good.
- Add full contact camber shims to the rear.
- Dialed the camber in. Front -3.3*, Rear -2.8*
- Brake flush.
- Oil change.
- Adjusted coil over perch. The lower perch came loose making the sway bar linkage end go into the tire. Caught it in time before any damage was done.
Next week the car goes back to stock for smog.
- Add full contact camber shims to the rear.
- Dialed the camber in. Front -3.3*, Rear -2.8*
- Brake flush.
- Oil change.
- Adjusted coil over perch. The lower perch came loose making the sway bar linkage end go into the tire. Caught it in time before any damage was done.
Next week the car goes back to stock for smog.
#7568
Not this guy haha. Staying in STF class for 2015. I really what to go K swap though. EVen better K swap boosted
#7571
Nice upgrade. I've decided to make the jump to some Torco SR-5 oil. Can't believe i'm doing a $100 oil change on a Honda haha.
#7572
Thank you sir. Of course the $100 oil change is worth it! That's what puts a smile on our faces every time we drive our cars right? :thumbsup:
#7576
How do you like the product?
Bisi and I had a good conversation at SEMA about boutique oils and their benefits. It was also nice chatting with the Torco guys. Since my shop sells/uses Torco i figured i'd give it a try.
Bisi and I had a good conversation at SEMA about boutique oils and their benefits. It was also nice chatting with the Torco guys. Since my shop sells/uses Torco i figured i'd give it a try.
#7577
no they are the arm and the blade you have to replace the whole assembly but they look cleaner in my opinion than stock so i don't mind one bit. they are a bit pricy but you should basically never have to replace them lol. (probably last like 5 years)
google Aero Vogue PIAA
google Aero Vogue PIAA