1st Generation (GD 01-08) The one that started it all! Generation specific talk and questions here!

Cold Start Stumble.

Thread Tools
 
Search this Thread
 
Old Apr 20, 2018 | 12:04 PM
  #1  
Mxzking's Avatar
Thread Starter
|
New Member
Joined: Apr 2018
Posts: 2
From: New York
Cold Start Stumble.

I have an issue with my 07 Fit with 113k. When I first start the car it has a very slight stumble lasts about a minute then it's fine and drives with no issues. I have replaced all the coils and the plugs. I'm not entirely sure what the cause could be. Any info on where to look would really help. It also does not show up on the misfire counter at all.
 
Old Apr 21, 2018 | 08:25 AM
  #2  
doctor J's Avatar
Member
Joined: Aug 2008
Posts: 1,606
From: Orange, CA, USA
5 Year Member
Valve clearances!
 
Old Apr 21, 2018 | 10:31 AM
  #3  
Mxzking's Avatar
Thread Starter
|
New Member
Joined: Apr 2018
Posts: 2
From: New York
Alright. I'll give that a shot. Any parts that I'm going to need besides the valve cover gasket?
 
Old Apr 22, 2018 | 10:46 AM
  #4  
doctor J's Avatar
Member
Joined: Aug 2008
Posts: 1,606
From: Orange, CA, USA
5 Year Member
Throttle body and upper intake plenum gaskets; grommet around the pcv tube on air cleaner housing (this is if you will leave throttle body in the car and remove plenum only)
Also could be a good idea to clean EGR passages (which requires lower intake cover gasket)
 
Old Apr 29, 2018 | 10:25 PM
  #5  
angus.mundy's Avatar
New Member
Joined: Oct 2017
Posts: 3
From: Vancouver, Canada
Originally Posted by Mxzking
Alright. I'll give that a shot. Any parts that I'm going to need besides the valve cover gasket?
Did you end up doing a valve adjustment? If so, did it fix your problem?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
knucklehead
Fit DIY: Repair & Maintenance
2
May 10, 2019 07:30 PM
sunnyday
2nd Generation (GE 08-13)
8
Jul 3, 2018 02:11 AM
chubbys2k
1st Generation (GD 01-08)
5
Nov 2, 2016 07:55 PM
doctor J
1st Generation (GD 01-08)
2
Mar 30, 2016 07:47 AM
Bigger On The Inside
1st Generation (GD 01-08)
5
Jan 25, 2015 11:20 AM




All times are GMT -4. The time now is 12:30 AM.