2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

Fit Pros - Help Me Out With My First Mods

Thread Tools
 
Search this Thread
 
Old Sep 24, 2008 | 11:19 PM
  #1  
AWDturbo's Avatar
Thread Starter
|
Member
iTrader: (1)
Joined: Sep 2008
Posts: 129
From: Muskego, WI
Fit Pros - Help Me Out With My First Mods

OK, I need some help on a few minor things to start on my first mods:

1) How do you remove the front dome light cover? (so I can access wiring to hardwire a Valentine One radar detector.) I pulled on it with some muscle, but it didn't come off - didn't want to break anything, so I stopped.

2) How do we kill the DRL's? On Subaru's there's a moduel under the dash near the steering column that gets pulled.

3) What are the model codes for the light bulbs in the 2009 Fit (primarily headlight, turn signals, fog lights, dome lights.) A couple sites I usually reference don't have 2009 info yet.

Thanks for any good info/tips you guys have.
 
Old Sep 24, 2008 | 11:22 PM
  #2  
SD_MR_FIT's Avatar
Member
5 Year Member
iTrader: (1)
Joined: Jun 2007
Posts: 4,812
From: San Diego,ca
dam...the 09s have DRL? thats cool i guess.

i dont know......

i just hard tap the rader to my cig lighter.
 
Old Sep 25, 2008 | 12:50 AM
  #3  
niko3257's Avatar
FitFreak GE8 DIY Guy
iTrader: (3)
Joined: Aug 2008
Posts: 1,929
From: Palm Coast FLA
5 Year Member
Originally Posted by AWDturbo
OK, I need some help on a few minor things to start on my first mods:

1) How do you remove the front dome light cover? (so I can access wiring to hardwire a Valentine One radar detector.) I pulled on it with some muscle, but it didn't come off - didn't want to break anything, so I stopped.

2) How do we kill the DRL's? On Subaru's there's a moduel under the dash near the steering column that gets pulled.

3) What are the model codes for the light bulbs in the 2009 Fit (primarily headlight, turn signals, fog lights, dome lights.) A couple sites I usually reference don't have 2009 info yet.

Thanks for any good info/tips you guys have.


https://www.fitfreak.net/forums/2nd-...headlight.html

fogs i think are h7 not 100% sure though
 
Old Sep 25, 2008 | 01:08 AM
  #4  
EXWRX's Avatar
Member
5 Year Member
Joined: May 2007
Posts: 428
From: Livermore, CA
I was gonna say Progress rear sway bar, but it's an '09. Not sure now.
 
Old Sep 25, 2008 | 01:16 AM
  #5  
badself's Avatar
Member
5 Year Member
Joined: Aug 2008
Posts: 364
From: baltimore, md
I think I read recently pulling fuse #15 kills the DRL's.
 
Old Sep 25, 2008 | 03:07 AM
  #6  
Neebs's Avatar
Member
Joined: Sep 2008
Posts: 357
From: Tucson, Az
5 Year Member
I am going to assume they're going to utilize the same model numbers from 07-08:

High & low beam headlamp:
9003/HB2
Parking Light Bulb Size:
2827
Front Turn Signal Light Bulb Size:
992 (7440A)
Rear Turn Signal Light Bulb Size:
992 (7440A)
Tail Light Bulb Size:
168 7443
Stop Light Bulb Size:
7443
High Mount Stop Light Bulb Size:
7440
Fog Light Bulb Size:
H11-55W
License Plate Light Bulb Size:
168
Back Up Light Bulb Size:
7440
Front Sidemarker Light Bulb Size:
2827
Rear Side Market Light Bulb Size:
168
Ash Tray Light Bulb Size:
None
Map Light Bulb Size:
None
Dome Light Bulb Size:
DE3175
Trunk/Cargo Area Light Bulb Size:
168

Wouldn't hurt to go ask your dealer.
 

Last edited by Neebs; Sep 25, 2008 at 03:15 AM.
Old Sep 25, 2008 | 06:19 AM
  #7  
Whats A Fit?'s Avatar
Member
Joined: Sep 2008
Posts: 108
From: Appleton, Wisconsin
5 Year Member
Originally Posted by badself
I think I read recently pulling fuse #15 kills the DRL's.
you are correct!
 
Old Sep 26, 2008 | 11:01 PM
  #8  
AWDturbo's Avatar
Thread Starter
|
Member
iTrader: (1)
Joined: Sep 2008
Posts: 129
From: Muskego, WI
Update...

Well yesterday (day 2 of ownership) was a busy day, and besides geting the windows tinted, I also:

> Killed the DRL's (thanks for the fuse-pull tips!)

> Replaced the headlamps with Sylvania 9003SU Ultras

> Hardwired the Valentine One, tapping the reading lamp power wire.

In case anyone is wondering, using a small screwdriver you just gently pop out the front reading lamp covers/switches to gain access to the screws holding the lamp assembly in place.

Now I just have to make a stinkin' decision on WHEELS!
 
Old Sep 26, 2008 | 11:04 PM
  #9  
manxman's Avatar
Banned
iTrader: (3)
Joined: Sep 2006
Posts: 3,288
From: Boulder Creek, CA, USA
Originally Posted by EXWRX
I was gonna say Progress rear sway bar, but it's an '09. Not sure now.
'09s have a rear anit-sway bar (Sport models).
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jl0r
Fit Interior & Exterior Illumination
109
Jan 6, 2019 07:52 AM
Kimomono
Fit Interior & Exterior Illumination
0
Feb 24, 2013 08:47 PM
hkfooey
2nd Gen GE8 Specific Fit Interior Modifications Sub-Forum
10
Aug 13, 2010 09:53 AM
Bigkatdaddy
2nd Generation (GE 08-13)
10
Oct 14, 2009 01:02 AM
LDO
Fit Interior & Exterior Illumination
13
Mar 10, 2008 12:24 AM




All times are GMT -4. The time now is 07:42 PM.