2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.
Sponsored by:
Sponsored by:

Cargo light upgrade

Thread Tools
 
Search this Thread
 
  #41  
Old 02-09-2009, 11:34 PM
OneStopCustoms's Avatar
Member
5 Year Member
iTrader: (15)
Join Date: Jan 2006
Location: L.A., CA
Posts: 780
I went to the honda dealer this past week and checked out the hatch on the new fits, the light is awkward where they mounted it... none the less, first time I saw an 09 and I fit better on the 07-08 than the 09...

Originally Posted by niko3257
Most def would work. The only thing you have to consider
is that those work better in the GD's
If you have ever seen a GD you will notice that the light is
angled.
On the GE's the light is not angled and faces down.

This is why I did what I did.
 
  #42  
Old 02-09-2009, 11:51 PM
niko3257's Avatar
FitFreak GE8 DIY Guy
5 Year Member
Thread Starter
iTrader: (3)
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,929
Originally Posted by OneStopCustoms
I went to the honda dealer this past week and checked out the hatch on the new fits, the light is awkward where they mounted it... none the less, first time I saw an 09 and I fit better on the 07-08 than the 09...


now you see my point.
everyone is limited.
this is why i went the over head route.
 
  #43  
Old 02-10-2009, 12:05 AM
OneStopCustoms's Avatar
Member
5 Year Member
iTrader: (15)
Join Date: Jan 2006
Location: L.A., CA
Posts: 780
Originally Posted by niko3257
now you see my point.
everyone is limited.
this is why i went the over head route.

imma see if Roger can get me a pic of his hatch to see what it looks like on his car.
 
  #44  
Old 02-16-2009, 04:56 AM
euge65's Avatar
New Member
iTrader: (1)
Join Date: Feb 2009
Location: New York, NY
Posts: 13
Originally Posted by niko3257
now take the old cargo light and cut all the stuff off the back.
make sure you leave out the parts that is utilizes as the holders.
sorry i don't have any good pics of this. this is the best one i have.
cut it all down to about 1/2 inch





now i cut 2 slots and slid the led under. then as for the other side
i screwed it down. use a very small screw and make sure you pre-drill.
should look like this.





now it's all done. finished product should look like this.




now just so you know the plug you keep seeing at the end of the led is
not going to be used. I cut it and spliced a wire about 3 to 4 feet long
to it.
now run the wire to your cargo light.
I'd have used a hot glue gun everywhere it's possible (to hold old light cover and the led board on place). Could be more reliable and solid than one small screw.
 
  #45  
Old 02-17-2009, 01:37 AM
Shaggs2Dope's Avatar
Frequent FitFreak Poster
Join Date: May 2008
Location: Bay Area, CA
Posts: 898
mine I used 3m double sided tape to hold it in place, no issues
 
  #46  
Old 02-17-2009, 02:00 AM
OneStopCustoms's Avatar
Member
5 Year Member
iTrader: (15)
Join Date: Jan 2006
Location: L.A., CA
Posts: 780
I have two sets of ------Blue------ Led dome/cargo that I am letting go as a pair for a good price. Contact me for info. They will fit GD3 and GE's...
 
  #47  
Old 02-17-2009, 09:35 PM
vinn's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Aug 2008
Location: SoCaL
Posts: 2,109
im buying this now
 
  #48  
Old 02-17-2009, 09:51 PM
1FiTpINOY's Avatar
Member
iTrader: (4)
Join Date: May 2008
Location: Miramar, FL
Posts: 693
I love how we are making up for the lagging of aftermarket parts with DIY inovative stuff lol.

Niko you sir are a genius!

***EDIT***
You must spread some Reputation around before giving to niko3257 again.

DOH! lawlz
 
  #49  
Old 02-17-2009, 10:11 PM
Roger's Fit's Avatar
Member
5 Year Member
Join Date: Nov 2008
Location: South Carolina
Posts: 154
Originally Posted by OneStopCustoms
imma see if Roger can get me a pic of his hatch to see what it looks like on his car.
you gotta send me an email... i just found this by accident.
 
  #50  
Old 02-17-2009, 10:20 PM
Roger's Fit's Avatar
Member
5 Year Member
Join Date: Nov 2008
Location: South Carolina
Posts: 154




It is brighter, but load it with groceries and the bags will block it.

I still don't regret it. I can see what to grab when i am unloading groceries the once in a while I do go shopping with the Fit.

Now I just need a quality HID KIt You know who you are...
 

Last edited by Roger's Fit; 02-17-2009 at 10:51 PM.
  #51  
Old 02-17-2009, 10:42 PM
concorde's Avatar
Member
5 Year Member
Join Date: Oct 2008
Location: Atlanter, JoJa
Posts: 282
whoa.. now that's bright!
 
  #52  
Old 02-17-2009, 11:56 PM
1FiTpINOY's Avatar
Member
iTrader: (4)
Join Date: May 2008
Location: Miramar, FL
Posts: 693
Originally Posted by Roger's Fit

It is brighter, but load it with groceries and the bags will block it.

I still don't regret it. I can see what to grab when i am unloading groceries the once in a while I do go shopping with the Fit.

Now I just need a quality HID KIt You know who you are...
wowserz! Who's LED kit is that??
 
  #53  
Old 02-18-2009, 02:17 AM
qbmurderer13's Avatar
Touched by his noodly appendage
iTrader: (6)
Join Date: Oct 2008
Location: Orlando, FL
Posts: 2,373
Guys, I just had niko do this install on my car while I was detailing his car. You HAVE to go ahead and do this. It is soooo bright. Lights up the entire hatch area in an even cool white led color. Its a night and day difference. About 4 times brighter than the picture above. Plus no matter what you put in it, it wont matter because the light is coming from overhead.
 
  #54  
Old 02-18-2009, 06:02 AM
Roger's Fit's Avatar
Member
5 Year Member
Join Date: Nov 2008
Location: South Carolina
Posts: 154
Originally Posted by 1FiTpINOY
wowserz! Who's LED kit is that??
OneStopCustoms.
 
  #55  
Old 02-18-2009, 10:13 AM
niko3257's Avatar
FitFreak GE8 DIY Guy
5 Year Member
Thread Starter
iTrader: (3)
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,929
Originally Posted by qbmurderer13
Guys, I just had niko do this install on my car while I was detailing his car. You HAVE to go ahead and do this. It is soooo bright. Lights up the entire hatch area in an even cool white led color. Its a night and day difference. About 4 times brighter than the picture above. Plus no matter what you put in it, it wont matter because the light is coming from overhead.


Thanks bro. Glad you like your LED setup.



as for everyone else this is a DIY thread.

If OneStopCustoms wants to sell his LEDS he needs to
start another thread himself. Sorry but I'm not hating
or anything.
just people are getting really confused.

also just so everyone knows yes his lights are bright.
but you have to remember. the GE8 light points down ward
unlike the light pictured on the GD3 witch points at an angle.

Just a little FYI
cause it might not be as bright as you want it to be.
 
  #56  
Old 02-18-2009, 12:03 PM
Join Date: Feb 2009
Location: Edmond, Oklahoma
Posts: 32
Wow this is an awesome mod!!! Subscribed!
 
  #57  
Old 02-18-2009, 06:27 PM
catbb67's Avatar
New Member
Join Date: Jan 2009
Location: texas
Posts: 17
Originally Posted by OneStopCustoms
I have Dailed custom made for honda fit lights... They light up the entire cargo plus the outside, its like having a flash light lol.


Not sure if it has been asked yet. Does it work for 2009 Fit Sport? The website only lists 2007-2008.
 
  #58  
Old 02-18-2009, 06:33 PM
catbb67's Avatar
New Member
Join Date: Jan 2009
Location: texas
Posts: 17
Originally Posted by niko3257
now you see my point.
everyone is limited.
this is why i went the over head route.
I just installed the shelf cargo cover. The cover will render the over head install ineffective. If I can get my hands on the OneStopCustoms light, I might add some kind of reflector under the light to help project the light into the cargo area.
 
  #59  
Old 02-18-2009, 07:04 PM
Join Date: Aug 2008
Location: Marietta, GA
Posts: 376
i have the cargo cover too. i have seen someone installed LED strips on the under side of the cargo cover so the whole trunk area is lit. the only thing is i need such light to be able to disconnect easily should i remove the cover alltogether.
 
  #60  
Old 02-18-2009, 10:57 PM
catbb67's Avatar
New Member
Join Date: Jan 2009
Location: texas
Posts: 17
Originally Posted by Surviver of the Fittest
i have the cargo cover too. i have seen someone installed LED strips on the under side of the cargo cover so the whole trunk area is lit. the only thing is i need such light to be able to disconnect easily should i remove the cover alltogether.
Great idea! I saw a bunch of different kinds of led strips at Pepboys yesterday. Also in Autozone. I see possibilities..........
 


Quick Reply: Cargo light upgrade



All times are GMT -4. The time now is 10:02 AM.