Abs light and traction light on after lowering
#1
Abs light and traction light on after lowering
so i lowerd my ge8 today and when i put everything back to gether my abs light is on and my traction control light is on .. i didnt mess up any wires.. so does anyone know what the problem could be or has anyone had this problem b4
#10
yes most definitely, that's how basic traction control systems work, they utilize the abs to detect slip.
You had to disconnect the wire from the strut to get it off the car, but if you didn't remove it from the hub more than likely you stretched it and damaged it. Did you possibly hang it with the strut when pulling it out?
You had to disconnect the wire from the strut to get it off the car, but if you didn't remove it from the hub more than likely you stretched it and damaged it. Did you possibly hang it with the strut when pulling it out?
#11
Triple posts with little time passed make you look desperate. Let people reply to your posts before posting again, especially in the middle of the night.
There is an button that lets you change your own posts. Use it.
There is an button that lets you change your own posts. Use it.
#13
i was desperate at the time .. but its all better now
#15
thanks have u seen my pic thread? it was kinda wierd i lowerd the front at night and drove it to work and i had the abs and traction light on then the next morning i did the rear and checked the wires... everything was ok so i turned the car on and the lights went off... its wierd but i hink the ar being like 2 inhes lower in the front aused the lights to come on
Thread
Thread Starter
Forum
Replies
Last Post