2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

Looking for Relay Diagram

Thread Tools
 
Search this Thread
 
Old Jul 12, 2018 | 09:51 PM
  #1  
blackpeter's Avatar
Thread Starter
|
New Member
Joined: Aug 2012
Posts: 1
From: Cincinnati
Looking for Relay Diagram

I am looking for a relay diagram for the interior fuse box on a 2009 Honda Fit Sport. Any help is greatly appreciated.
 
Old Jul 13, 2018 | 04:27 AM
  #2  
Black3sr's Avatar
Member
iTrader: (3)
Joined: Jul 2009
Posts: 4,250
From: Kitchener,Ont Canada
5 Year Member
this help?


 
Old Feb 14, 2021 | 12:48 AM
  #3  
mika_chan's Avatar
New Member
Joined: Feb 2021
Posts: 8
From: NZ
Question

Hi! newbie here.
I am having trouble with my 2008 2nd Gen Fit side mirrors (possibly broken gear so it doesn't stop rotating), and I'm considering pulling out the fuse/relay responsible for that as I don't want to disassemble the thing yet until my replacement gear arrives.
Problem is, the fuse diagram doesn't indicate at all which fuse is for the side mirrors.
I tried the relays too and per diagram above, the one I should disconnect is relay #1 (leftmost upper corner), but that didn't solve the problem either (i.e. there's still power going to the side mirrors).

Did I interpret the diagram wrong? Or would you have other ideas on how I can solve it?
Thanks in advance!
 
Old Feb 14, 2021 | 07:18 AM
  #4  
Black3sr's Avatar
Member
iTrader: (3)
Joined: Jul 2009
Posts: 4,250
From: Kitchener,Ont Canada
5 Year Member
Trying pulling fuse #10 a 7.5 amp one. In the under dash panel.
 
Old Feb 15, 2021 | 01:10 AM
  #5  
mika_chan's Avatar
New Member
Joined: Feb 2021
Posts: 8
From: NZ
Originally Posted by Black3sr
Trying pulling fuse #10 a 7.5 amp one. In the under dash panel.
You, my dear fellow, are a bloody GENIUS!
HOW??? How did you figure that out??
Fuse #10 says "A/C (if equipped)" in the circuit diagram and never in a million years would I have guessed it to be that one.
In any case, have removed the fuse and the side mirror stopped its rotation.
Aircon doesn't work (i think), but I can live with that as I rarely use it anyways.
You have saved me a lot of trouble and worry, and may good karma return to you tenfold and your car never ever malfunction.

THANKS SO MUCH!!
 

Last edited by mika_chan; Feb 15, 2021 at 01:11 AM. Reason: typo
Old Feb 15, 2021 | 06:24 AM
  #6  
Black3sr's Avatar
Member
iTrader: (3)
Joined: Jul 2009
Posts: 4,250
From: Kitchener,Ont Canada
5 Year Member
LMAO. Thanks for starting my day off. Glad it at least stopped it. No idea what the problem would be

I just checked the wiring diagram in my shop manual.

Now I just had my first major repair. Replaced my springs and put in new struts and axles.
 
Old Feb 17, 2021 | 07:37 PM
  #7  
mika_chan's Avatar
New Member
Joined: Feb 2021
Posts: 8
From: NZ
Originally Posted by Black3sr
LMAO. Thanks for starting my day off. Glad it at least stopped it. No idea what the problem would be

I just checked the wiring diagram in my shop manual.

Now I just had my first major repair. Replaced my springs and put in new struts and axles.
Guess my wishes for good karma came in too late. Lol. But i hope you have no more major repairs in the next 10 years.
The problem with my mirror is probably is possibly a broken gear inside, like what happened to this guy's Fit (
)
Another person also suggested just unplugging the mirror wires, which I will look into.
Anyways, thanks again for your help!
 
Old Feb 18, 2021 | 06:41 AM
  #8  
Black3sr's Avatar
Member
iTrader: (3)
Joined: Jul 2009
Posts: 4,250
From: Kitchener,Ont Canada
5 Year Member
M new struts sound clunky so going back to garage this morning to make sure they ok. It is -9 C right now so could be cold some as well.

Have fun taking mirror apart. Mine are heated like all Cdn ones. I replaced my covers with ones with winkers that was a chore snaking wires down through doors to interior. Later I took mirrors out to peal back the heating element to install winking arrows behind the mirror. Works well.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
paul_g
2nd Generation (GE 08-13)
6
Jan 27, 2026 06:09 AM
omygod711
1st Generation (GD 01-08)
3
Dec 28, 2018 02:56 PM
seth8288
1st Generation (GD 01-08)
1
Jun 27, 2017 07:14 AM
billydee203
2nd Generation (GE 08-13)
5
Jan 18, 2016 04:02 PM
savemyjazz
1st Generation (GD 01-08)
0
Mar 19, 2015 11:08 PM




All times are GMT -4. The time now is 06:33 AM.