I've a 2011 FIT. Foreigner living in China and I just finished installing sound deadening everywhere ( roof, floor, doors, etc) I am keeping the same Stereo for now, but this model comes only with 2 speakers in the front ( which we all know they suck) and I have upgraded them 2 years ago for a Couple of Alpine SPS-600.

Now i purchased Alpine SPS-610C-G which are 2x Woofers and 2x Tweeters.

I don't have the space for the Tweeters over the Instrument panel like all of you do have.

I am wondering if someone has done this DIY for the tweeters....

Here is how the car looks like without the Tweeters
http://car0.autoimg.cn/upload/spec/9...5952127272.jpg

 

Perfect opportunity to modify your dash and mount the tweeters how you like them.

Could also mount them somewhere on the door panel.

Do the alpines offer a center speaker mount for the tweeters so the assembly is completely like a normal speaker?

 

I am not much into putting the tweeters at the door panels.
I am quite OBSSESSED about putting the tweeters at the end corners of the Instrument panel end ( right and left corners) as you see in the picture of new Fit...

http://img4.bitautoimg.com/autoalbum...2251235_14.jpg

I can reach with my hand and touch the Right sided corner has some space behing the AC duct. Haven't been able to reach the Left side yet...

 

I just managed to dig under the dash and find out some lies that I think are used for some FIT models, so I decided to dig and put my own tweeters there... Sound is quite good now...

Original Condition:


Below dash board are the markers of a hole for some FIT models



Marking the location of the hole






Tweeter Installed