Hello everyone,
I recently installed Navi buttons on my Fit, but then when I ordered some trim for the steering wheel, it wouldn't fit because I ordered the wrong one, and I discovered that nobody actually makes CF trim for the GE8 Fit Navigation wheel. So, I'm considering getting the parts to adapt a Civic FG1/FG2 wheel instead.

So, with that in mind, I won't need a bunch of the parts that I originally used for the retrofit, so I figured I'd see if anyone else was interested in picking them up.

Here's what I'd be selling, and their prices from Bernardi:
35875-SMG-003 - LID ASSY., MULTI INFORMATION SWITCH
$22.22
35876-SMG-E01 - CASE
$2.82
78517-TF0-N81 - SET PLATE, R.
$5.40
90173-SL4-003 - SCREW-WASHER (4X12)
$1.43
90178-SNB-N61 - SCREW, TAPPING (3X8) (PO)
$0.52
78518-SMA-G01ZA - COVER, BODY
$20.44
78543-TF0-N81ZA - GARNISH B
$35.89

Total price from Bernardi was $88.72 before shipping.

Would be looking for $60-70 shipped.

DOES NOT INCLUDE ANY NAVIGATION BUTTONS. These are simply the replacement trim parts you would need to *add* Navigation buttons to a wheel. All plastic and fasteners, no wires.

Note! If you're feeling a bit adventurous, I'd consider also trying to get your hands on this:
35870-TX9-A01 - SWITCH ASSY., MULTI INFORMATION

This replaces the blank on the righthand side of the wheel and should control the trip meter (so you can do it from the wheel instead of reaching for the dash while you're stopped). The cable reel should already be prewired for this, my Sport is. You would just have to run wires from the switch itself into the wheel-side harness. Should be pretty simple.