2nd Generation GE8 Specific Suspension & Brakes Sub-Forum Threads discussing suspension and brake related modifications for the 2nd generation Honda Fit (GE8)

Spring Rates

Thread Tools
 
Search this Thread
 
  #1  
Old 09-13-2009, 07:34 AM
Lek's Avatar
Lek
Lek is offline
Member
Thread Starter
Join Date: Nov 2008
Location: Thailand
Posts: 533
Spring Rates

I notice that the Fit GE has spring rates of F1.7k / R 2.0k and the GD has spring rates of F 3.1 / R4.9.

When I bought my BC Coilovers for my GE the standard springs were F5k / R4k which I thought were going to be way too hard. Anyway, after fitting I found out that they weren't too hard just firm.

How come there is such a big difference in spring rates on the GE between Stock and my coilovers, but the springs don't feel it while driving.
 
  #2  
Old 09-13-2009, 02:38 PM
ToFit2Quit's Avatar
Member
Join Date: Jan 2008
Location: Orange County
Posts: 554
Not sure, but maybe the dampers on the coilovers compensate for the spring rate...
 
  #3  
Old 09-13-2009, 07:47 PM
shazaam's Avatar
Member
5 Year Member
Join Date: Jun 2008
Location: ND
Posts: 1,013
if the dampers are valved for the springs it shouldn't feel like ish. n those aren't high spring rates by any means either.
 
  #4  
Old 09-13-2009, 08:40 PM
Lek's Avatar
Lek
Lek is offline
Member
Thread Starter
Join Date: Nov 2008
Location: Thailand
Posts: 533
those aren't high spring rates by any means either.
Stock Fit GE has spring rates of F1.7k / R 2.0k vs BC Coilovers F5k / R4k.

That's over 250% harder.
 
  #5  
Old 09-15-2009, 03:10 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
wow, the GE's stock sus feels more like 5k front 6k rear.

you sure about 1.7k and 2.k? that's awefully low.
 
  #6  
Old 09-15-2009, 09:42 PM
Type 100's Avatar
Member
5 Year Member
Join Date: Jan 2009
Location: Parañaque City, Philippines
Posts: 1,888
Originally Posted by kenchan
wow, the GE's stock sus feels more like 5k front 6k rear.

you sure about 1.7k and 2.k? that's awefully low.
I think Lek is correct on that.

If you look around researching spring rates for aftermarket components on the GE, most lowering springs and street-use coilovers have really low spring rates vs. the GD, and they don't really increase all that much from the GE stock spring rates. I guess it is due to the GE's greater torsional rigidity, allowing for softer springs.

But yeah I get what you mean. I test-drove a GE6 and didn't feel like its ride was improved over my GD1 on 16s. Must be down to the dampers then?
 
  #7  
Old 09-15-2009, 10:07 PM
Lek's Avatar
Lek
Lek is offline
Member
Thread Starter
Join Date: Nov 2008
Location: Thailand
Posts: 533
I think with my BC coilovers it's down to the damping force. On settings 4 or 5 they feel better than stock, but if I adjust to 9 or 10 they're very firm, anything above that will break your back. I've never had them on setting 30.
 
  #8  
Old 09-16-2009, 12:36 PM
kenchan's Avatar
Official Fit Blogger of FitFreak
5 Year Member
iTrader: (4)
Join Date: Dec 2007
Location: OG Club
Posts: 20,289
interesting interesting...
 
  #9  
Old 09-16-2009, 07:33 PM
Texas Coyote's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Oct 2007
Location: Anderson County Texas
Posts: 7,388
These are real stiffly built little cars..... In the old pre unit construction days if you were to stiffen your suspension the chassis would flex so much you could see the front fenders undulating when driving on a bumpy road.... That was the reason for wide gaps between the front doors, fenders and hood on high performance muscle cars.
 
  #10  
Old 09-17-2009, 10:07 AM
TheFitman's Avatar
Banned
Join Date: Sep 2009
Location: EVERYWHERE
Posts: 22
Originally Posted by Texas Coyote
These are real stiffly built little cars..... In the old pre unit construction days if you were to stiffen your suspension the chassis would flex so much you could see the front fenders undulating when driving on a bumpy road.... That was the reason for wide gaps between the front doors, fenders and hood on high performance muscle cars.
"high performance muscle car" is an oxymoron
 
  #11  
Old 09-17-2009, 12:18 PM
Texas Coyote's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Oct 2007
Location: Anderson County Texas
Posts: 7,388
Not all high performance cars were categorized as muscle cars and most of the muscle cars only offered performance in a straight line for 1320 feet.... That is what it was all about back then.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
revd34
Fit Suspension & Brake Modifications
3
01-09-2021 02:03 PM
pig_pit
2nd Generation (GE 08-13)
1
04-06-2012 03:41 AM
jmag310
Fit Suspension & Brake Modifications
5
03-05-2011 05:48 AM
El Chupacabura
Fit Suspension & Brake Modifications
2
06-19-2010 10:13 PM
wontfit
Fit Suspension & Brake Modifications
1
04-20-2008 10:55 PM



Quick Reply: Spring Rates



All times are GMT -4. The time now is 06:36 PM.