Replacing shifter surround?
Replacing shifter surround?
Hello - I recently purchased a 2018 FIT CVT and unfortunately the silver trim piece around the shifter is all scratched up. Does anyone know if that trim pops right off or would I have to remove the whole center console to replace it?
Basically everything on this car just pops right out. If you're looking for the silver knob ring it's part 54134-T5A-951ZA and its pretty easy to remove. If you're talking about the silver area abound the shifter with the different dive modes on it then it's a little more difficult because you have to remove the center console but after that it's pretty easy to remove. The number of that part would be 54710-T5R-A82ZA.
https://www.hondapartsnow.com/parts-...=4232405&pnc=7
https://www.hondapartsnow.com/parts-...=4232405&pnc=7
Basically everything on this car just pops right out. If you're looking for the silver knob ring it's part 54134-T5A-951ZA and its pretty easy to remove. If you're talking about the silver area abound the shifter with the different dive modes on it then it's a little more difficult because you have to remove the center console but after that it's pretty easy to remove. The number of that part would be 54710-T5R-A82ZA.
https://www.hondapartsnow.com/parts-...=4232405&pnc=7
https://www.hondapartsnow.com/parts-...=4232405&pnc=7
83402-T5R-A01ZA
It looks like it should snap off but I’m hesitant in case there are screws or something holding it in.
Page 5 of this lighting instruction PDF makes it seem like there are 6 screws holding that piece down from underneath..
https://www.collegehillshonda.com/in...lumination.pdf
* found the link to this in another post on this forum.. it's here (so it gets proper credit)
https://www.collegehillshonda.com/in...lumination.pdf
* found the link to this in another post on this forum.. it's here (so it gets proper credit)
Thread
Thread Starter
Forum
Replies
Last Post



