3rd Generation (2015+) Say hello to the newest member of the Fit family. 3rd Generation specific talk and questions here.

No power after radio install

Thread Tools
 
Search this Thread
 
  #1  
Old 06-14-2017, 10:24 PM
urngegoat's Avatar
New Member
Thread Starter
Join Date: Jun 2017
Location: Baton Rouge, LA
Posts: 2
No power after radio install

Hi guys,

I added a powered sub and Sirius radio to my 2017 Fit EX today. After running all of the wires, I turned on the system and everything worked fine.

But when I went to push the head unit back into the dash, I lost power. Everywhere. I've checked all of the fuses I could think of and they all look good.

When I press the ignition button, I hear a relay click in the steering column and the push button lights up and the light flashes green. But that's it, nothing else.

Any ideas?
 
  #2  
Old 06-14-2017, 10:40 PM
fizzy99's Avatar
Member
Join Date: Feb 2017
Location: Dallas
Posts: 59
Hmmm. Assuming that you have your key fob in the card... Take the fob, and use it to press the start button.
Anything different happen?
 
  #3  
Old 06-14-2017, 10:46 PM
urngegoat's Avatar
New Member
Thread Starter
Join Date: Jun 2017
Location: Baton Rouge, LA
Posts: 2
fizzy99,

We have progress!! Using the fob I was able to start the car. I don't have radio power, and the interior lights don't activate with the door open, so I assume I must have blown a fuse. Any ideas which one?

Edit: It was the 'backup main' fuse under the hood. Swapped it out and now we're good to go. Thanks fizzy99!!
 

Last edited by urngegoat; 06-14-2017 at 10:58 PM.
  #4  
Old 06-14-2017, 11:49 PM
fizzy99's Avatar
Member
Join Date: Feb 2017
Location: Dallas
Posts: 59
Awesome! Glad my suggestion lead to the fix.
 
  #5  
Old 06-15-2017, 05:05 PM
Spunkmire's Avatar
Member
Join Date: Jul 2013
Location: Orange County, California
Posts: 31
My car did this to me when I was installing a stereo. I took the ground terminal off of the battery for a little bit and then reconnected it and everything seemed to work fine after that and I didn't run into anymore trouble.

Have a good day!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
s.gumbs@gmail.com
Fit DIY: Repair & Maintenance
2
08-12-2016 10:56 PM
chubbs899
3rd Generation GK Specific DIY: Repair & Maintenance Sub-Forum
2
06-07-2015 09:41 PM
SilverEX15
3rd Generation (2015+)
3
07-30-2014 01:58 PM
Kishore
1st Generation (GD 01-08)
1
01-06-2013 03:36 PM
STOCKTREK
Fit DIY: Repair & Maintenance
4
07-25-2011 06:09 AM



Quick Reply: No power after radio install



All times are GMT -4. The time now is 01:17 AM.