3rd Generation GK Specific DIY: Repair & Maintenance Sub-Forum Threads discussing repairs and maintenance you can do yourself on the 3rd generation Honda Fit (GK)

Fuel injector parts

Thread Tools
 
Search this Thread
 
Old Jan 20, 2021 | 08:20 PM
  #1  
Dotthedog's Avatar
Thread Starter
|
Member
Joined: Dec 2020
Posts: 22
From: AMESBURY
5 Year Member
Fuel injector parts

greetings, I am replacing the injectors on my 2015 Fit EX 91K

I have gotten Injectors, and Fuel pipe16010-5R1-315-305 injectors
16012-5R1-315 fuel pipe

That should be it for parts right?

I can use the same fuel rail?, that the injectors plug into
 
Old Jan 21, 2021 | 09:45 AM
  #2  
Jared592's Avatar
Member
Joined: Jan 2011
Posts: 397
From: Omaha, NE
5 Year Member
Just curious: What happened that you need new injectors?
 
Old Jan 21, 2021 | 12:12 PM
  #3  
Dotthedog's Avatar
Thread Starter
|
Member
Joined: Dec 2020
Posts: 22
From: AMESBURY
5 Year Member
I keep getting Check Engine Lights

P219A, P0420

I have only had the car for 2000 miles bought used..

I added an oil catch can, and plan on also pulling the intake manifold and cleaning the air intake valves..

The car occaisional stutters, so do both all at the same time

 
Old Jan 21, 2021 | 02:26 PM
  #4  
woof's Avatar
Member
Joined: Aug 2014
Posts: 1,522
From: Manitoba CANADA
5 Year Member
Originally Posted by Dotthedog
greetings, I am replacing the injectors on my 2015 Fit EX 91K
I have gotten Injectors, and Fuel pipe16010-5R1-315-305 injectors
16012-5R1-315 fuel pipe

That should be it for parts right?
There's also a throttle body gasket #17107-5R0-004 mentioned in Honda Service Bulletin 18-027
 
Old Jan 22, 2021 | 10:52 AM
  #5  
Jared592's Avatar
Member
Joined: Jan 2011
Posts: 397
From: Omaha, NE
5 Year Member
91k is crazy low miles to be needing to mess with any aspect of the fuel injection system unless someone was messing around with it and broke something. Not knowing the whole situation, my inclination would be to return the car to stock and see if the issue still occurs. I say this just because something doesn't add up if you're needing to do this much work on a car this fresh.
 
Old Jan 22, 2021 | 11:17 AM
  #6  
Dotthedog's Avatar
Thread Starter
|
Member
Joined: Dec 2020
Posts: 22
From: AMESBURY
5 Year Member
Thanks..

Last time I checked the car is stock, sure I added an oil catch cat..

Plan to scope the intake and if ugly clean it..

if it (The codes ) persists then onto the fuel injectors..

 
Old Jan 23, 2021 | 09:17 AM
  #7  
tyrtill's Avatar
Member
Joined: Jul 2018
Posts: 106
From: Usa
5 Year Member
It’s almost certainly ugly I would plan on it. It’s not that hard to remove and I didn’t even have to replace the gaskets.

107k


 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Traveller
3rd Generation GK Specific DIY: Repair & Maintenance Sub-Forum
8
Dec 17, 2020 10:24 AM
Vash
2nd Generation (GE 08-13)
0
Feb 2, 2018 08:34 PM
Principe1218
2nd Generation (GE 08-13)
8
Jan 22, 2010 11:13 PM
azkikersfit
Fit Engine Modifications, Motor Swaps, ECU Tuning
2
Sep 29, 2007 12:35 AM




All times are GMT -4. The time now is 11:02 AM.