Wheels, tires & lowering spring clearance
#1
Wheels, tires & lowering spring clearance
Hello all!
Just snagged a '19 Sport. This is my first fit chassis so I could use some guidance!
I want to get these fugly wheels off and close some of the wheel gap. I'm planning on picking up a set of 16x7 40 offset wheels wrapped in 205/50/16 tires pairs with eibach lowering springs. But I'm worried about rubbing.
Anyone running a similar setup?
Just snagged a '19 Sport. This is my first fit chassis so I could use some guidance!
I want to get these fugly wheels off and close some of the wheel gap. I'm planning on picking up a set of 16x7 40 offset wheels wrapped in 205/50/16 tires pairs with eibach lowering springs. But I'm worried about rubbing.
Anyone running a similar setup?
#2
That is a fairly standard set up. I think you will find on the Wheels & Tires section that most people don't have any problem with it. I have close to the same thing (+42 Offset and 16x6.5 wheel) on Swift Springs and haven't had any rubbing. The Swifts have less of a drop than the Eibach ones.
Front/Rear
Swift:
1.0 / 0.9 inches
Eibach:
1.2 in/1.4 in
Front/Rear
Swift:
1.0 / 0.9 inches
Eibach:
1.2 in/1.4 in
Thread
Thread Starter
Forum
Replies
Last Post
Francheeze
2nd Generation GE8 Specific Wheel & Tire Sub-Forum
13
08-22-2014 09:57 PM
GE8_typeR
2nd Generation GE8 Specific Suspension & Brakes Sub-Forum
5
07-18-2012 03:36 AM
joshua27
Fit Suspension & Brake Modifications
2
11-04-2007 05:34 PM