16x8 wheel will this FIT on 07 fit?..

Old Nov 29, 2011 | 05:15 PM
  #1  
nsxfit's Avatar
Thread Starter
|
Member
5 Year Member
Joined: Feb 2009
Posts: 47
From: anaheim
16x8 wheel will this FIT on 07 fit?..

I just wanted to know if anyone have this kind of set up on their FIT. Im actually looking to buy this fitment XXR 521 16x8. Will i have any issue with this set up? please advice.

thanks...
 
Old Nov 29, 2011 | 05:58 PM
  #2  
nxtfit_08's Avatar
Member
5 Year Member
Joined: Aug 2008
Posts: 1,170
From: orlando,fl
they will work but you have to do fender work im running 15x8 +15 also depends on what offset you get them too
 
Old Nov 29, 2011 | 06:20 PM
  #3  
GAFIT's Avatar
Member
Joined: Feb 2008
Posts: 4,329
From: Cleveland, GA
5 Year Member
Short answer is it will not fit without modifying. Now, if you are asking if the car can be modified to make them fit, the answer is yes.

AFAIK no 8" wheel will fit without work. I had rubbing in the rear with 7" +40's until I did some massaging. The factory wheels are +55...anything less than about +45 will rub.
 
Old Nov 29, 2011 | 06:50 PM
  #4  
k24afit's Avatar
Member
5 Year Member
iTrader: (5)
Joined: Oct 2008
Posts: 248
From: downey
they don't fit u gotta make them "fit" by pulling ur fenders or camber,,I'm running 16x8 0 offset all around I only rub a little on the rear
 
Old Nov 29, 2011 | 11:45 PM
  #5  
nsxfit's Avatar
Thread Starter
|
Member
5 Year Member
Joined: Feb 2009
Posts: 47
From: anaheim
Thanks for the info! ; ). I'm getting a XXR 521 rolling the fender not a problem I'm just concern about will the front wheel turn without rubbing. The wheel size 16x8 with a +20 offset and putting these tires on them 215/40/16 with just a little strech on it....
 
Old Nov 30, 2011 | 03:04 AM
  #6  
ediddyfit's Avatar
Member
5 Year Member
Joined: Dec 2006
Posts: 102
From: All over the world
good luck with that....if i get rims i'am not planning on any fender rolling....just regular rims that fit.

post pics when you're done
 
Old Nov 30, 2011 | 05:27 AM
  #7  
oOopinkmanoOo's Avatar
Member
Joined: May 2010
Posts: 259
From: Orange, CA
sick this is good info!!!
 
Old Nov 30, 2011 | 02:47 PM
  #8  
nxtfit_08's Avatar
Member
5 Year Member
Joined: Aug 2008
Posts: 1,170
From: orlando,fl
you shouldnt have any problems at all but the size tire might be you have to go smaller like a 205 or 195 so you dont rubb as much knock to knock
 
Old Dec 1, 2011 | 12:07 AM
  #9  
nsxfit's Avatar
Thread Starter
|
Member
5 Year Member
Joined: Feb 2009
Posts: 47
From: anaheim
alright guys thanks for the info again. I will call the store tom so they can place my order on this wheel...

thanks again....
 
Old Dec 1, 2011 | 12:10 AM
  #10  
nsxfit's Avatar
Thread Starter
|
Member
5 Year Member
Joined: Feb 2009
Posts: 47
From: anaheim
ohhh i forgot tires that will be on that wheel is 205/40/16 not 215/40/16...
 
Old Dec 1, 2011 | 01:05 AM
  #11  
GAFIT's Avatar
Member
Joined: Feb 2008
Posts: 4,329
From: Cleveland, GA
5 Year Member
The narrower you go in tires the less work you will have to do for clearance. Just keep in mind this is not the best handling plan.
 
Old Dec 15, 2011 | 08:08 AM
  #12  
Misfyt's Avatar
Member
Joined: Oct 2011
Posts: 119
From: Westminster, California
Will I need to fender roll/fender pull? I am going to get xxr 501s 16x8 +15 offset, and can't decide on what tires , I was thinking 195/50/16? I will be on Buddyclub N+ coils .
 
Old Dec 15, 2011 | 05:05 PM
  #13  
nxtfit_08's Avatar
Member
5 Year Member
Joined: Aug 2008
Posts: 1,170
From: orlando,fl
Originally Posted by Misfyt
Will I need to fender roll/fender pull? I am going to get xxr 501s 16x8 +15 offset, and can't decide on what tires , I was thinking 195/50/16? I will be on Buddyclub N+ coils .

yeap im running 15x8 +15 on mine and i had to run camber and pull and roll fenders
 
Old Feb 23, 2020 | 12:32 AM
  #14  
TheTickingGE8's Avatar
Member
Joined: Feb 2020
Posts: 61
From: pa
Originally Posted by Misfyt
Will I need to fender roll/fender pull? I am going to get xxr 501s 16x8 +15 offset, and can't decide on what tires , I was thinking 195/50/16? I will be on Buddyclub N+ coils .

what ended up happening I have a set of these exact wheels I just bought and I’m now getting terrified they won’t fit.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nthusiastt
2nd Generation (GE 08-13)
23
Apr 15, 2020 02:22 AM
Muster
2nd Generation GE8 Specific Wheel & Tire Sub-Forum
17
Jul 4, 2011 02:46 PM
Blueputtputt
2nd Generation (GE 08-13)
11
Apr 29, 2010 12:55 AM
SikxChoi
Fit Wheels & Tires
3
Jan 13, 2010 02:51 AM
HB1320
1st Generation (GD 01-08)
27
Feb 14, 2009 01:09 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:37 PM.