Transmission Help!
#1
Transmission Help!
Okay Socal friends I need a good shop in OC to work on my transmission. It started making noise in 1st gear, then 1st and second and now I can hear it in 3rd. If I let out the clutch, I can especially hear it spinning when it's cold. I'm thinking it might be a bearing, but I haven't found any help online. I'll probably need to change my clutch when it's out, since it is also original. Any good shops that you could recommend?
#3
Well, the noise got worse quickly, so I took it to Saddleback Transmissions and I was right, it was a bearing on the mainshaft, but everything else looked okay-the clutch was only about 40% worn! New throwout bearing and motor mount-since they have to drop the whole assembly and it was worn...Can't wait to get it back tomorrow-except for the bill...
#5
Well, only one bearing was bad-on the mainshaft bearings okay, but inner race was galled, and the throwout bearing was loose and noisy, so my whole tranny was inspected and rebuilt $1100 later, it's nice and quiet again.
Thread
Thread Starter
Forum
Replies
Last Post
TroyGgd3
1st Generation (GD 01-08)
12
10-26-2016 08:30 AM
Cameron James Dulong
Fit DIY: Repair & Maintenance
2
01-19-2016 07:58 PM