P0847 Code on 2010 Fit
Thread Starter
|
New Member
Joined: Feb 2010
Posts: 3
From: Canada
P0847 Code on 2010 Fit
Hi folks,
I have a 2010 Honda Fit LX that just gave me a P0847 Code (Transmission Fluid PressureSensor/Switch B Circuit Low). Could there be something more serious causing this code than an issue with the wiring leading to the sensor, or the sensor itself? In other words, could this be indicative of something major wrong with the transmission? Or fluid levels? I don’t want to just replace the sensor if actually trying to warn me that something else is wrong. Thoughts?
Thanks,
Hip
I have a 2010 Honda Fit LX that just gave me a P0847 Code (Transmission Fluid PressureSensor/Switch B Circuit Low). Could there be something more serious causing this code than an issue with the wiring leading to the sensor, or the sensor itself? In other words, could this be indicative of something major wrong with the transmission? Or fluid levels? I don’t want to just replace the sensor if actually trying to warn me that something else is wrong. Thoughts?
Thanks,
Hip
Member
Joined: May 2016
Posts: 63
From: Niles
Those sensors are always going bad. Mine gave me PO848. Very Very common problem. It is fortunately easy to fix. Jack up, remove that section of plastic sheild, un hook connector, unscrew old one and washer rescrew in new one and new washer put connector on finished. The only thing it is indicative is that those sensors are total crap.
About 20ml of ATF will leak out, buy a new crush washer they are sold separate.
About 20ml of ATF will leak out, buy a new crush washer they are sold separate.
Last edited by sschoe2@gmail.com; Sep 11, 2017 at 11:36 AM.
Thread
Thread Starter
Forum
Replies
Last Post
bayarea5100
1st Generation (GD 01-08)
2
Nov 27, 2011 11:16 PM