Spoon Sports


Spoon Sports 4-2-1 Header – GD1/GD3 – Part number: 18100-GD3-000 – Retail: 745 AUD / 600 USD
Spoon Sports B-Pipe – GD1/GD3 – Part number: 18220-GDA-002 – Retail: 395 AUD / 320 USD
Spoon Sports Street Muffler (GD1/GD3) – Part Number: 18030-GDA-000 – Retail: 745 AUD / 600 USD
Spoon Sports N1 Mufler (GD1/GD3) – Part Number: 18030-GDA-011 – Retail: 425 AUD / 345 USD

 

^^^ yikes yikes and yikes. Going to be awhile for exhaust.

 

I seriously wish someone would post up a CUSTOM exhaust from a muffler shop. Just a small (12-18") resonator and no muffler with a nice stainless or chrome tip. Nothing gaudy, not over flashy...louder than stock, but not like a weed whacker on steroids. Also you would have more space under the car. (less scraping exhausts on slammed cars)

*I will bet that someone's done it, but is afraid of getting flamed!* -if you have, post it up!!! you won't get flamed by me! You just might be able to teach a few people a ting or two.

An exhaust like that can be bent up in about 30min, and will sound good.... the best part is the price < $200!!!!!!


People won't do it just because they stick to name brands and a sure thing. I understand, but I am willing to bet you get the same performance and just as good of sound out of a custom setup.


IMHO it will look better too.

 

The Megan Racing / Weapon*R one is mine. Really nice setup, video doesn't do it much justice I think. Megan Racing by itself is pretty generic sound, (there should be an old video around somewhere of just my car with the axle-back) but with the added headers it gets really throaty and is truely an impressive sound for a 1.5 liter while still being quiet.

 

Your exhaust is BY FAR one of (if not absolutely) my fav!

Thanks for posting.

 

i have a custom axleback. a cherry bomb muffler lol. basically i have 2 resonators and no muffler. no sound clips though, my DSLR doesn't take video

 

here's my contribution - apexi world sport II, car and video belong to "aviatar" on these boards:

YouTube - Honda Fit, Apexi Axle-Back Rev

YouTube - Honda Fit, Apexi Axle-Back Normal Drive

YouTube - Honda Fit, Apexi Axle-Back, drive 2

YouTube - Honda Fit, Apexi Axle-Back drive 3

YouTube - Honda Fit, Apexi Axle-back drive 4

I was supposed to buy this particular axle back, but I thought i'd save for the KW SC instead........ when my warranty is up or when it's finally released, whichever one comes first *Zing-Zing*

-Charlie

 

nicely done. when i have time i will do the straight pipe. just 1 cherry bomb for the resonator and 50 mm piping. i want to hear how that sounds.


but other then that, great thread to start.

 

Here is mine Megan Catback with Fujita SRI

YouTube - Megan catback and Fujita SRI

 

Too bad! ....Well, if you get one, post it up.


C_O, SD_MR_FIT, and VBPFIT: Thank you!!!!

SD_MR_FIT- If you have time to post up the straight pipe that would be cool, take your time though. NO RUSH. I can update the thread whenever...



*****list updated, page 1*****

 

The link for the J's 50RS is the same as Arisenfury's Megan exhaust...
Anyways.. my contribution:

I'm running a J's 50RS axle back and a T1R Bmax intake.
YouTube - J's Racing 50RS on a Honda Fit

 

Fujitsubo PowerGetter and T1RTestPipe (Accelerating)
YouTube - Honda Fit w/ FujitsuboPowerGetter+T1RTestPipe (Accelerating)

 

here is a sound clip of the Spoon B-pipe and Spoon N1 axle-back
YouTube - Spoon B-pipe and Spoon N1 Axle-back

cavie187, where did you find the part info for the Fit, all I can find on that site is for Civics and Integras I would like to get the spoon 4 to 1 header but im realy undicided because of the price

 

when people make these videos they need to rev high.

those midrange sounds dont cut it. like 4k revs are not that great. if your gonna make a video you have to rev high to get all the sound out of that exhaust, so people can hear it.

 

Make sure that is not the same video i already have of your car . I found it in another thread, but it is from photobucket/putfile.... something like that. In the other caption it doesn't say you have the B-Pipe, so it may be a different video all together. (I thought i heard one more rev in one of them too, but still not sure) I am sure you know what you posted, where, better than me. lol
-thanks-

The info was taken from the stickied Exhaust thread----->https://www.fitfreak.net/forums/fit-exhausts/2446-tech-great-honda-jazz-exhaust-thread.html



*****Videos Updated on Page One!!!!*****

 

YouTube - Honda Fit Megan Axel Back

YouTube - Fit with Megan Axel Back

I'm surprised no one had these up already.

 

Anyone have a video of the spoon N1 while driving? and one with a drive by and accelerating?

 

As of now the thread has only been up for about 21 hours, so don't be surprised. lol

They are added, and thank you.

+1

 

Haven't found one yet. There was one with Japanese writing and stuff, but the video was HORRIBLE!!!! I refuse to post it. lol



****Updated again!****

 

hmm.. darn.. c'mon fit owners i know there are a few of you out there with this setup so lets hear that spoon n1 ..