OBX Race Header
#5
Can somebody check or give me some light about the header issue. I took the car to have a custom pipe made to try out the car without th muffler. Being under the car I told the guy at the shop that the next thing that I wiil do to better the performance will be a header, and he told me not to because the fit already has a header (not a big ugly maniful) and he told me to look and it is true , it has a 4 into 1 header, so I belive that the power gains will not be as in former hondas or nissans that when you put a header in them you could feel the defference right away. please some technical help here.
#7
You have see good results, more HP and see a Fuel consumption decrease(more low) ?
You must put a O2 simulator ? Or on the L13a we have only one A/F sensor ?
You must put a O2 simulator ? Or on the L13a we have only one A/F sensor ?
Last edited by vbo; 06-28-2006 at 01:04 AM.
#9
Originally Posted by vbo
You have see good results, more HP and see a Fuel consumption decrease(more low) ?
You must put a O2 simulator ? Or on the L13a we have only one A/F sensor ?
You must put a O2 simulator ? Or on the L13a we have only one A/F sensor ?
I have panel air filter, 4-1 obx headers, sporting cat, without central silencer... and mechanical O2 simulator on the second lambda (of course).
I'll let you know about fuel consumption in 500-600 km
The first impression is that the car accelerates better at every rpm and reaches the red line very quick, but I'm afraid I should adjust the air/fuel ratio... I think It's become a bit lean...
#12
This is the O2 simulator I bought. It works perfectly....
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMERFB%3AIID
For every question about OBX products I asked Alex. He's very kind alex.hom@sbcglobal.net
I like these headers a lot.... their price is very honest and their quality great.
Anyway I think I'll build a circuit for tmap sensor to adjust fuel ratio....
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMERFB%3AIID
For every question about OBX products I asked Alex. He's very kind alex.hom@sbcglobal.net
I like these headers a lot.... their price is very honest and their quality great.
Anyway I think I'll build a circuit for tmap sensor to adjust fuel ratio....
#14
I'm really satisfied.... after 1 year
I upgraded the car with air filter kit (home made), apexi air fuel controller, double exhaust, light crank pulley ecc.. ecc..
You can found o2 mechanical on ebay easily..... for 5-6 $
I upgraded the car with air filter kit (home made), apexi air fuel controller, double exhaust, light crank pulley ecc.. ecc..
You can found o2 mechanical on ebay easily..... for 5-6 $
#15
For intake, you had put a pipe for take fresh air and a K&N panel or a pipe with custom CAI ?
Good gain ? the fuel consuption is less or more ?
Pulley are good ? what vendor ?
You have really maked gain with apexi ? I have ear this make only change the MAP sensor value and can make a lot HP loss.
Good gain ? the fuel consuption is less or more ?
Pulley are good ? what vendor ?
You have really maked gain with apexi ? I have ear this make only change the MAP sensor value and can make a lot HP loss.
#16
I should take some pictures to show you the work. I used a universal air filter and inox steel pipe 60mm
Fuel consumption is less. I use a LPG system. With 20-22 I run 450 km...
Crank pulley is from Summit 龍穎國際產*有限公司
When you configure apexi you have to know when and what modify of your tmap....
Hp losses?
My car is a missile!!!!
Fuel consumption is less. I use a LPG system. With 20-22 I run 450 km...
Crank pulley is from Summit 龍穎國際產*有限公司
When you configure apexi you have to know when and what modify of your tmap....
Hp losses?
My car is a missile!!!!
Thread
Thread Starter
Forum
Replies
Last Post
kevinkidstar138
Fit Engine Modifications, Motor Swaps, ECU Tuning
7
02-23-2010 07:24 PM
Staff@WR
Fit Engine Modifications, Motor Swaps, ECU Tuning
103
09-17-2008 04:54 AM