Does anyone know what fuse or wire i can use if i want to tie into that power supply?
any advice or links to other posts would be greatly appriciated
thanks

 

You talking about connecting to the battery?
The size of the wiring and fuse will depend on what you will be powering.

 

yea the wire that actualy supplies the fogs with the power to turn on...
im pitting in accent lighting that i only want on when the fogs are on and i know that you can tie into the domelight so i was wondering if i could do the same thing with the foglights

 

I don't see why not check ur owners manual the fuse would probly be listed in there I think

 

Thats the problem i did and i cant find anything unless i am looking in the wrong place

 

Dose anyone else have any idea of what i can do?

 

Pull the fusebox cover off and on there it will tell you which fuse is for the fogs. Go to any automotive store and get a fuse tapper. Connect the fuse tapper to what you want to power. Make sure you don't add to much lights to that circuit cause it would overload it.

 

that actually helps alot thank you

 

or run a relay off the fuse you want n run power directly from the bat. to whatever you're planning on lighting up. safer for the most part.

 

If u can't find it on the fuse box park near a wall turn the fogs on pull one out at a time and replace them untill u find the right one then tap it from there good luck