aftermarket seats and seat rail questions

Reply Subscribe

Thread Tools

Search this Thread

Apr 27, 2006 | 11:23 PM

#21

MicroNSX

New Member

Joined: Apr 2006

Posts: 11

From: San Diego, CA

This is BEAUTIFUL!!!

Apr 27, 2006 | 11:42 PM

#22

AJ PwR Jr.

Former Vendor

iTrader: (10)

Joined: Nov 2005

Posts: 563

From: Japan

Quote:

Originally Posted by dougiepants

Any fitment report on the J's and Alex rails Ben?

Something weird going on.... I posted results already but I can't find the post but anyways. Let's go it again.

*there's airbag sensor on both seats. On the passenger side, you will need to take it off the seat and make a bracket to holt it with the seat belt. Older Hondas has the belt bolted to the B-pillar but on the Fit it has bolten on the seat.

The driver seat is pretty easy to remove but the passenger was a bitch to take off so when anyone of you try to do it, just make sure you becareful otherwise you will scratch up the panels.

Thanks
Ben

Apr 27, 2006 | 11:59 PM

#23

fshwcrs

Member

Joined: Apr 2006

Posts: 239

From: 951

Looks great.

How's the seating position compared to stock? Higher/Lower?

Apr 28, 2006 | 12:14 AM

#24

aziatiklover

Master FitFreaker

Joined: Apr 2006

Posts: 2,211

From: welcome to Jamrock

wow love the seats and I love how u got them different cuz the passenger side and recline nice........... thats wat I would do if I had my fit hahaha

Apr 28, 2006 | 12:20 AM

#25

2ride4life

Member

Joined: Dec 2005

Posts: 46

From: Canada

sweet seats!!!

by the by, what is with the dead animal in the back seat ?! hehehe

Apr 28, 2006 | 01:17 AM

#26

C2AUTOSPL

Member

iTrader: (2)

Joined: Apr 2006

Posts: 319

From: Loma Linda, CA USA

NIce, seats. I have the GIAs as well, only 1 though for my s13.

Apr 28, 2006 | 02:30 AM

#27

crozewski

Thread Starter

Member

Joined: Apr 2006

Posts: 67

From: none

Ben, for the record, are you using Bride or J's rails there?

Apr 28, 2006 | 02:36 AM

#28

crozewski

Thread Starter

Member

Joined: Apr 2006

Posts: 67

From: none

Quote:

Originally Posted by MK GD3

Here are some pics of installed bride seat rails /jdm recaor's in my fit
Fitment is almost 100%
However passenger airbag module/sensor/whatever--- needs to be mounted on the side if factory seat belts are to be retained!

Enjoy!

http://boomplustoys.net/fit/128.jpg

http://boomplustoys.net/fit/134.jpg

Bride rails bolt up to Recaro seats? I'm imagining you're using Bride MO rails? Do all of the holes bolt up?

Apr 28, 2006 | 04:22 AM

#29

C2AUTOSPL

Member

iTrader: (2)

Joined: Apr 2006

Posts: 319

From: Loma Linda, CA USA

Bride MO is the only Bride rail i know that will work with "other" bottom mount seat.

Apr 28, 2006 | 12:30 PM

#30

MK GD3

Member

Joined: Apr 2006

Posts: 52

From: Vancouver

Quote:

Originally Posted by fshwcrs

Looks great.

How's the seating position compared to stock? Higher/Lower?

It does sit slightly lower

Apr 28, 2006 | 12:31 PM

#31

MK GD3

Member

Joined: Apr 2006

Posts: 52

From: Vancouver

Quote:

Originally Posted by crozewski

Bride rails bolt up to Recaro seats? I'm imagining you're using Bride MO rails? Do all of the holes bolt up?

Using Bride RO rails and yes the rails bolt up to all the holes

Apr 28, 2006 | 12:32 PM

#32

drunken_Monkey

New Member

Joined: Apr 2006

Posts: 7

From: arlington,tx

looks good man, how long did it take you?

Apr 28, 2006 | 12:37 PM

#33

STTICH

Member

Joined: Aug 2005

Posts: 320

From: Australia

looks great. definately the best looking seats for hondas!

Apr 28, 2006 | 10:26 PM

#34

MK GD3

Member

Joined: Apr 2006

Posts: 52

From: Vancouver

Quote:

Originally Posted by drunken_Monkey

looks good man, how long did it take you?

the drive side was quite fast
however the passenger side took a bit longer to take out
all in all with fone calls and stuff it took me about one hour to do both!