iso mount or cage mount
Thread Starter
|
New Member
Joined: Sep 2007
Posts: 17
From: whitby,ontario
iso mount or cage mount
hi everybody---need some help
i was thinking of buying a used deck that doesnt have the metal mounting cage on it--can a deck be installed in my 07 fit using the factory iso monts???please help
i was thinking of buying a used deck that doesnt have the metal mounting cage on it--can a deck be installed in my 07 fit using the factory iso monts???please help
Last edited by metso; Sep 29, 2008 at 12:17 PM.
Member
Joined: Feb 2007
Posts: 779
From: Montreal' Canada
Both the Metra and Scoche kits come with ISO mounts so it shouldn't be a problem.
Member
Joined: Aug 2008
Posts: 76
From: 49024
the factory metal ISO brackets are infinitely superior to the crappy plastic "mounts" that come with the aftermarket kits. what a joke. i actually installed my headunit the typical "DIN" way, but trimmed down the mounting sleeve to allow the rear ISO mount screws to be exposed so i could re-install the OE brackets.
using the OEM brackets allows you to use the two main support screws that hold the OE headunit in place. there's not a single squeak or rattle in my install and it is solid as a rock.
re-use the OE brackets. i can't even imagine using a DIN only mount on the plastic flimsy aftermarket kits.
using the OEM brackets allows you to use the two main support screws that hold the OE headunit in place. there's not a single squeak or rattle in my install and it is solid as a rock.
re-use the OE brackets. i can't even imagine using a DIN only mount on the plastic flimsy aftermarket kits.
Thread
Thread Starter
Forum
Replies
Last Post
allmotormark
Fit DIY: Repair & Maintenance
4
Oct 10, 2014 01:16 PM
