I have had the center nav panel now for quite a while and I finally want to move my head unit, amp, and sub from my 4Runner to 09 Fit Sport. I want to have all the parts in advance of making the switch.

In the 09 sport stereo wires thread it looks like the Accord 08+ wire harness will work. This is the harness I plan on buying:
70-1729 plugs into car wire harness 4 new stereo;
This is antenna adapter I plan on ordering:
40-HD10 Antenna adapter cable;
Are these correct? I have a dash adapter for double din. Will I need any other adapters?

I have Kenwood 6 1/2" component speakers for front and Kenwood 6 1/2" regular speakers for back. Is there a place to buy speaker adapters for the 09 fit? I would like to hold on to the old speakers so doing mod discussed here is out of the question. In this thread there is discussion of a speaker adapter for fit:
https://www.fitfreak.net/forums/2nd-...-question.html
Does anyone know where to get a speaker adapter?

Thanks for all help!

 

where did you get this double din dash adapter for the GE8? Last time I checked, no one could find one.

 

Hmmm, I'm using the one I have in my 4Runner. It was double din and I have a single din head unit. It has a shelf underneath where the radio is. It is like the one Inmyrem took pictures of. Will this not fit on the 09 Fit?

 

so hold on, you have a fit sport with nav currently?

or you have the plain old sport model?


i'm trying to figure out what you said here:

" I have had the center nav panel now for quite a while "

 

u can go to dealership and buy the center nav panel alone

 

but is there anything behind is that is going to be able to support it??

 

that i dont know sir
i usually go to some professional shop to get my car audio done anyways
i dont trust my self

 

amen brotha, I'm waiting on a lil more info to come out on this model, cause when it does i'm adding an alpine head unit with navi and a 9.5" flip down screen in the back for my child. it will be awesome.

 

i dont know what to do to my set up
....
i cant decide from navigation unit..or just a regular higher end head unit......
o well i dont have the money for either yet anyways

 

Just now seeing this as I've kinda been on vacation for awhile. I was going to go with a dual din dvd model, but opted for a non-dvd model instead to keep my little pocket for little things. I currently have the Kenwood Excelon KDC-X792 single din head unit. The controls aren't as well designed as my previous Kenwood Excelon Z828 that I was using, but the flexibility of the new unit is very nice. I listed a handful of handy part numbers here that I used for my install. Since Metra had everything I needed, I went with all Metra. The universal kit I listed has worked well. The universal kit does allow for a dual din installation as well.