Best place to mount an amp?
Mine is mounted to the sub box that is in the spare tire well. It stays out of sight and gives me all the room I need to haul goodies! I think that for most amps under the seats is going to be tight. You might be able to hide it behind one of the rear side panels.
not much room under the seats
i used Velcro and placed my amp in the trunk on the floor. ran the wires through the plastic along the side of the car. it was really easy. In the trunk, there is plenty grounding spots and you will have plenty of wire since it is not a long distance from the head unit. The only downside is that everybody can see what you have
I just need a cargo cover...
i used Velcro and placed my amp in the trunk on the floor. ran the wires through the plastic along the side of the car. it was really easy. In the trunk, there is plenty grounding spots and you will have plenty of wire since it is not a long distance from the head unit. The only downside is that everybody can see what you have
I just need a cargo cover...
Mine are currently mounted to the back of my back seats, however I am thinking about moving them to an amp rack that I will be mounting to the back of my enclosure. Well it could be the front depending on how you look at it. Anyway, The spare tire well is a nice idea but I don't know if both my amps would fit down there plus it's kinda like a tomb down there I would definitely put a couple fans to push/pull air in and out.
Do you happen to have a picture of your setup? I'm looking to upgrade my system and I need to keep all my trunk space. Basically I want the interior to look totally factory. Thanks!
I'm thinking of making a custom underside to the magic seat. The Pioneer amp I'm getting is a small digital amp, it fits perfectly between the supports for the magic seat. Thing is, it can't protrude any lower than the seat already is as the seat bottom touches the floor when the seat backs are folded down.
I'm a noob so this got placed in the wrong section
I started a thread in the wrong area but I had some pix on where I could try to mount possibly a Kicker PX200.1 to drive two 6.5 inch subs (almost an oxymoron - like Jumbo Shrimp . . .) in the rear doors, and the 4 x 75 watt Punch PBR300X4 amp to power a pair of separates in the front.
https://www.fitfreak.net/forums/2nd-...ggestions.html
Anyone try mounting the amps under the REAR seats? I'd want to put a mesh cage to protect the amps in the event I lift the rear seats to go into 'Tall Mode'.
Thoughts?
https://www.fitfreak.net/forums/2nd-...ggestions.html
Anyone try mounting the amps under the REAR seats? I'd want to put a mesh cage to protect the amps in the event I lift the rear seats to go into 'Tall Mode'.
Thoughts?
Not the best idea
the honda fit kinda has a body filler holding the panels together for the hatch and separates after time and gets water into the spare tire location also you might get a little moisture through screw holes driving around through a puddle yk
Thread
Thread Starter
Forum
Replies
Last Post
NightScreams
2nd Generation GE8 Specific Fit I.C.E. Sub-Forum
5
Apr 25, 2013 07:22 PM
jayhawker
2nd Gen GE8 Specific Fit Interior Modifications Sub-Forum
19
Oct 17, 2011 12:49 AM
surfchiro
Fit Interior Modifications
3
Jul 13, 2007 07:26 AM





