Any recommendation of brake pad for 09 fit? beside Project U?
Need advice for quality brake pad not "branded" brake pad.

 

Project Mu pads are good.
Other brands you can check out: Hawk, Porterfield, EBC, Tanabe.

 

ebc is junk. hawk and project mu are great!

havent found where they sell the project mu pads by themselves for the fit

 

i found project mu brake pad at $180 include install. is it cheap? or any place you know cheaper?

 

how about endless brakes?

 

that i'm not too sure, but i can ask for you. u mean just the brake pad? or include the whole brake system? but for project mu brake pad at $180 is it cheap?

 

where did you find the pads cause there only 80 bucks

 

endless pads are expensive and i dont think they make the pads by themselves for our fit

 

they do for the gd3

http://endlessusa.com/appguide/Brake%20Pads.htm

 

good fine but expensive

 

Brake Pad - Brakepads Honda Fit

3 kinds of hawk pads. I think i might get the hp plus performance pads when it comes time.

 

i think im going to get the HPS pads. i dont really hit the track that much

 

have u ever tried ebc? which pads?
hawk hps is junk...i have them on right now they feel like stock pads
ebc reds r

 

i want to try the project mu, where i can buy it and which model?

 

yeah i have, the green i dont see any point in buying the red for my use and they feel how you are describing your hawk HPS. the only thing i can say about the hawks is that after awhile they started making noise. thats why i wanted to try the project MU but i only found them with the big brake kit.

what are you running right now? just the pads? i have stainless lines and stock rotors with pads. stopping power seems to be fine.

 

ordered project MU pads they were $155 shippped not what i wanted to spend but i dont see anyone else with a fit running them.

the cheap ones are the stock replacements and these are the next ones up.

 

where have you get them?

 

FYI we share the same caliper with jdm EG2/6/9, EK3/4, usdm ep si hatch & rsx base.

Which kinda Project U did u get?

I used Hawk HPS & HP+ with stock rotors w/ stock blank rotors before. HPS is about the same as stock replacement, HP+ got a strong initial bite, quite a bit of noise & dust which is hard to wash.

Using Ferodo DS2500 with power slot slotted rotors now, same setup that I used on my EM1 before. Yes it cost more but no noise what-so-ever, dust can be easily hosted off & brake power is linear. The warmer the brakes the better feel it is(it's still 2-3c at night out there in Vancouver)......

U really get what u paid for on brakes & suspension parts...

 

there not stock replacement pads. project mu has excellent pads and these work with stock rotors. the only other mod i have to brakes is the T1R stainless lines which i think should be enough.