Track wheel update
#1
Track wheel update
I use my fit for the rain track days - since my other car is in no condition to be driving in the rain.
The plan was to run my A/S in the rain and if dries up I can put something sticker on.
These wheels are taken from my track car 13x8 with 5" back spacing.
The spacer needed is 10mm and the front will need longer studs (which I have not gotten) It passed the business card test in terms of clearance between the caliper and the wheels. I had to do a little bit of filing to get it. But I do still hear some minor metal rubbing but I don't feel any resistance when spinning the tire.
This set up has so far not been track test yet as I will need to get longer studs.
The plan was to run my A/S in the rain and if dries up I can put something sticker on.
These wheels are taken from my track car 13x8 with 5" back spacing.
The spacer needed is 10mm and the front will need longer studs (which I have not gotten) It passed the business card test in terms of clearance between the caliper and the wheels. I had to do a little bit of filing to get it. But I do still hear some minor metal rubbing but I don't feel any resistance when spinning the tire.
This set up has so far not been track test yet as I will need to get longer studs.
Last edited by thewatcher101; 03-04-2011 at 08:35 PM.
#2
HHAHAHA this looks FLUSH AS HELL!
thanks for the info, my friend has got some diamond racing wheels that are similar to thesse and when i test fitted i realized i needed a spacer, but i wasnt sure how bug, now ima get the spacers and run those wheels!
thanks for the info, my friend has got some diamond racing wheels that are similar to thesse and when i test fitted i realized i needed a spacer, but i wasnt sure how bug, now ima get the spacers and run those wheels!
Thread
Thread Starter
Forum
Replies
Last Post
thewatcher101
Car Shows, Events, and Racing
44
11-24-2012 09:32 PM