When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You've been MIA for a bit bro, glad you're still in the scene...
Yeah, life has been interesting separating the Air Force, moving home, finding a job, buying a house, and starting my master's. Sadly Foxy has been a bit neglected.
Tinted my tail lights. I was going to buy the aforementioned, but $350 is too steep. It's very hard to make the tint uniform looking off the car, but too much hassle to tape and cover the car to do it while still on it. Yes my plates say MURICA.
As noted by evilchargerfan...I pulled the trigger on the small projectors. They come nicely packaged and are $50.99 shipped. To be clear: this product is perfect for the GK platform (initial thoughts here). Took no more than 5 minutes and should be on the short list of things to do immediately upon buying a Fit. 10/10 would do again.
As another user noted, if not super close, they are touching the small reflector ring. What will happen to that long term is on the list of things to watch.
I'm not up to snuff on headlight technology. My previous car had factory HIDs which I dealt with changing ballast and ignitor at one point. My understanding is that going with the LED conversion or HID retrofit in standard housings is somewhat dangerous for the other people on the road (meaning they're very bright). Where on the spectrum is the product you install at? I'm honestly clueless even after I read the amazon description. It's a bulb replacement, but it's LED? But it has projectors? Sorry, I know this sounds stupid, but if you can explain I would appreciate it.
I'm not up to snuff on headlight technology. My previous car had factory HIDs which I dealt with changing ballast and ignitor at one point. My understanding is that going with the LED conversion or HID retrofit in standard housings is somewhat dangerous for the other people on the road (meaning they're very bright). Where on the spectrum is the product you install at? I'm honestly clueless even after I read the amazon description. It's a bulb replacement, but it's LED? But it has projectors? Sorry, I know this sounds stupid, but if you can explain I would appreciate it.
Yeah, I'm not too well read on the subject either, but they look cool and I'm not a fan of the yellow coloring of most normal bulbs. I don't think they'll present too much problem for other drivers as I don't drive much, if at all, at night. They are projectors, they are just small enough not to have to do any retrofitting. Yes, they are LED.
for those of you wondering how the cut off looks like, here is a comparison of the bulb dannyj has and another setup with a proper retrofit. keep in mind, the retrofit is a much more expensive option, and installation is more involved
for those of you wondering how the cut off looks like, here is a comparison of the bulb dannyj has and another setup with a proper retrofit. keep in mind, the retrofit is a much more expensive option, and installation is more involved
mini projectors:
retrofits:
I'd also point out it's a helluva lot riskier doing a retrofit. You can jack up the housing and be out several hundred dollars in the blink of an eye. If you have it done "professionally" it can cost just as much as buying prebuilts.
indeed. retrofits are NOT for everyone. the mini projector is a good happy medium/best of both worlds
a lot of forum people dont like hid pnp's due to the fact that they blind oncoming traffic .... one thing this crowd always over look is most people dont want to pay for retrofits/cannot afford retrofits/dont want the stress of going the retrofit path. this is why pnp hid kits are so damn popular, its cheap and easy to install. lets hope the mini projector becomes the next big thing!
I had a strange scenario where I couldnt full get the adhesive to fully make contact with the car. IE, after install, some parts of adhesive were left exposed ... maybe I did something wrong .... :shrug:
mYAAOSwqVBZa2JH&vx p=mtr
