|
The engine block uses the same parts as the L-15a Vtec (except for displacement) so any mods you have read about that don't cause the L-15a Vtec model to blow up will work just as well on your L-13. You could use a kit for the L-15a Vtec on your ISDI BUT the ECU controller will have to be adjusted for your ISDI not the Vtec specs for fuel and ignition advance, and the boost will have to be controlled because of the smaller displacement.
And the photos here on Fitfreak of the melted intake were from Turbo use not Nitrous.
Last edited by claymore; 03-25-2008 at 02:16 AM.
|