Quote:
Originally Posted by equiptcustoms
I also bought the aem fic 6 30910. id like to know how you connected the map sensor, because the installation guide states that it has maf connection or both maf and map connection.. can i use the maf connection to the map or connect the analog a/b to the map..??? thank you hope someone can help me wire the aem.
turbo fit l15a
thank you |
if you are not going to get the boomslang harness (dont see why you would want to wire it up yourself but thats just me) then you would intercept the red/green wire on connector A pin 30 with the 2 MAF wires.
Then run the vacuum line through the firewall. 1 side connects to the AEM the other tee into the vacuum line for the pcv.
On the setup screen for MAF input select MAP and enter 2.9 volts to clamp (exactly 14.8). The you can tune your fuel and ignition maps based on the AEM's map sensor/rpm while clamping the stock one so the ecu never sees boost.