Fit FREAK.net

Go Back   Unofficial Honda FIT Forums > Fit Trix > Fit Exhaust Systems

Fit Exhaust Systems Threads discussing exhaust related topics including headers, cats/test pipes, b-pipes, and cat-back & axle-back systems for the Honda Fit

Welcome to Fit Freak!
Welcome to Fit Freak,

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Reply
 
LinkBack Thread Tools Display Modes
  #21 (permalink)  
Old 09-22-2007, 12:12 PM
Member
iTrader: (0)
 
Join Date: May 2007
Location: Greenville, SC
Posts: 68
Rep Power: 0
ldweng is an unknown quantity at this point
These are the torque specs from the service manual.

Bolts/nuts on the header to the block - 33 ft-lb

Bracket bolts - 17 ft-lb

Sprung bolts to Cat - 16 ft-lb
Reply With Quote
  #22 (permalink)  
Old 09-25-2007, 01:39 AM
Sugarphreak's Avatar
Member
iTrader: (0)
 
Join Date: May 2007
Location: Calgary, Alberta
Posts: 4,778
Rep Power: 42949679
Sugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to liveSugarphreak relies on Rep Points to live
Hey sweet, now I can torque them down when I check them this weekend!

Thanks Ldweng!!!
__________________
For a jolt of pure awesome... just click the sugarphreak button!

Reply With Quote
  #23 (permalink)  
Old 09-28-2007, 09:21 PM
predestyned's Avatar
Member
iTrader: (0)
 
Join Date: Sep 2007
Location: georgia
Posts: 39
Rep Power: 0
predestyned is an unknown quantity at this point
your write-up was helpful although i think you got a lil mixed up on the order of procedures i.e.
3. Still from the bottom loosen the bracket connecting to the header using a 12mm. Loosen at the header as well as the bolt connected to the transmission.
4. With 12 mm remove the bolts with springs connecting the downpipe and the header. I had a air rachet which is soo handy

should be 4 and then 3. maybe im just mechanically retarded, but loosening the bracket first caused me to bend one of the spring cat screws . there was nothing to support my muffler while i was trying to break the nuts loose finally re-attached the support and had no more problems. no big deal like i said im a lil mechanically retarded and i am sure others are out there!
Reply With Quote
  #24 (permalink)  
Old 10-06-2007, 06:46 PM
predestyned's Avatar
Member
iTrader: (0)
 
Join Date: Sep 2007
Location: georgia
Posts: 39
Rep Power: 0
predestyned is an unknown quantity at this point
testing



my new megan racing heaDER

Last edited by predestyned; 10-06-2007 at 06:47 PM. Reason: add text
Reply With Quote
  #25 (permalink)  
Old 10-06-2007, 08:18 PM
predestyned's Avatar
Member
iTrader: (0)
 
Join Date: Sep 2007
Location: georgia
Posts: 39
Rep Power: 0
predestyned is an unknown quantity at this point
K&N TYPHOON S.R.I., MEGAN RACING HEADER, MEGAN AXLE-BACK EXHAUST....CHECK IT OUT.
YouTube - HONDA FIT 07
Reply With Quote
  #26 (permalink)  
Old 11-04-2007, 08:13 PM
biblicone's Avatar
Member
iTrader: (0)
 
Join Date: May 2007
Location: philly
Posts: 121
Rep Power: 0
biblicone is an unknown quantity at this point
Did you paint your exhaust? It looks black in the video.
Reply With Quote
  #27 (permalink)  
Old 11-04-2007, 11:00 PM
Arisenfury's Avatar
Member
iTrader: (0)
 
Join Date: Apr 2007
Location: CT
Posts: 1,395
Rep Power: 923405
Arisenfury relies on Rep Points to liveArisenfury relies on Rep Points to liveArisenfury relies on Rep Points to liveArisenfury relies on Rep Points to liveArisenfury relies on Rep Points to liveArisenfury relies on Rep Points to liveArisenfury relies on Rep Points to liveArisenfury relies on Rep Points to liveArisenfury relies on Rep Points to liveArisenfury relies on Rep Points to liveArisenfury relies on Rep Points to live
If I remember correctly I think he did, along with SciroccoTDI and myself. There's a couple threads on it if you're really interested.
Reply With Quote
  #28 (permalink)  
Old 11-05-2007, 12:05 AM
biblicone's Avatar
Member
iTrader: (0)
 
Join Date: May 2007
Location: philly
Posts: 121
Rep Power: 0
biblicone is an unknown quantity at this point
Quote:
Originally Posted by Arisenfury View Post
If I remember correctly I think he did, along with SciroccoTDI and myself. There's a couple threads on it if you're really interested.
If and when I do get an exhaust, I plan on going the route of the flat black... I saw the post on the Megan double tip exhaust painted flat black. I like that look a lot. All stealth and 'murdered out.'
Reply With Quote
  #29 (permalink)  
Old 11-05-2007, 09:23 AM
Zangoose GD3 Blue's Avatar
Member
iTrader: (1)
 
Join Date: Aug 2007
Location: New York LONG ISLAND
Posts: 2,456
Rep Power: 73857
Zangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to live
Send a message via AIM to Zangoose GD3 Blue
with the headers how much did your car improved... because i just ordered my new megan headers the other day and cant wait to get it...
__________________
07 Honda Fit sport 5Speed M/T aka WARTURTLE
SLW FTW
Mods Installed--> Suspension completed ( track ready)/ Engine 70% done/ Comestic ( well who cares lol )

Now: Building Custom Turbo 60% completed....

Reply With Quote
  #30 (permalink)  
Old 11-05-2007, 10:59 AM
Member
iTrader: (0)
 
Join Date: Sep 2007
Location: Las Vegas
Posts: 157
Rep Power: 0
t3chn0rav3rb0y is an unknown quantity at this point
Send a message via AIM to t3chn0rav3rb0y
hey zangoose!!! cant wait to hear the exhaust with the headers man...you planning on running a test pipe?
Reply With Quote
  #31 (permalink)  
Old 11-05-2007, 11:43 AM
predestyned's Avatar
Member
iTrader: (0)
 
Join Date: Sep 2007
Location: georgia
Posts: 39
Rep Power: 0
predestyned is an unknown quantity at this point
painted muffler

yes i did paint the muffler and about two inches of the twin pipes looks really good .i finally added the mid pipe so i am cat back now with the header. i will make a new video the old video i didnt really get on it so it sounds really mellow, which in fact it is but you dont really hear the true sound untill you get around 3000-4000 rpm! look for it today! by the way i cannot take credit for the painted muffler got the idea from someone on this forum ..great idea though, especially on a white fit!
Reply With Quote
  #32 (permalink)  
Old 11-05-2007, 12:09 PM
Zangoose GD3 Blue's Avatar
Member
iTrader: (1)
 
Join Date: Aug 2007
Location: New York LONG ISLAND
Posts: 2,456
Rep Power: 73857
Zangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to live
Send a message via AIM to Zangoose GD3 Blue
Quote:
Originally Posted by t3chn0rav3rb0y View Post
hey zangoose!!! cant wait to hear the exhaust with the headers man...you planning on running a test pipe?
im thinking about dude but not to sure yet... but i'll def. will get it when time is right... right now im making plans to race against my friend Spec V... thats his car by the way YouTube - Spec-v with a greddy Evo2 Exhaust Soundclip
__________________
07 Honda Fit sport 5Speed M/T aka WARTURTLE
SLW FTW
Mods Installed--> Suspension completed ( track ready)/ Engine 70% done/ Comestic ( well who cares lol )

Now: Building Custom Turbo 60% completed....


Last edited by Zangoose GD3 Blue; 11-05-2007 at 03:58 PM.
Reply With Quote
  #33 (permalink)  
Old 11-05-2007, 03:09 PM
predestyned's Avatar
Member
iTrader: (0)
 
Join Date: Sep 2007
Location: georgia
Posts: 39
Rep Power: 0
predestyned is an unknown quantity at this point
meagan header

Quote:
Originally Posted by Zangoose GD3 Blue View Post
with the headers how much did your car improved... because i just ordered my new megan headers the other day and cant wait to get it...
noticed a significant difference with just the header and intake. but when i added the full cat back it really gave it a nice boost around 3000 rpms!
Reply With Quote
  #34 (permalink)  
Old 11-05-2007, 04:09 PM
Zangoose GD3 Blue's Avatar
Member
iTrader: (1)
 
Join Date: Aug 2007
Location: New York LONG ISLAND
Posts: 2,456
Rep Power: 73857
Zangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to live
Send a message via AIM to Zangoose GD3 Blue
Quote:
Originally Posted by predestyned View Post
noticed a significant difference with just the header and intake. but when i added the full cat back it really gave it a nice boost around 3000 rpms!
thanx dude... cant wait to install it
__________________
07 Honda Fit sport 5Speed M/T aka WARTURTLE
SLW FTW
Mods Installed--> Suspension completed ( track ready)/ Engine 70% done/ Comestic ( well who cares lol )

Now: Building Custom Turbo 60% completed....

Reply With Quote
  #35 (permalink)  
Old 11-06-2007, 04:25 PM
predestyned's Avatar
Member
iTrader: (0)
 
Join Date: Sep 2007
Location: georgia
Posts: 39
Rep Power: 0
predestyned is an unknown quantity at this point
check it out k&n typhoon s.r.i. megan header/midpipe/axleback
" http://www.youtube.com/v/sfECunpy5_I&rel=1" windows up
http://www.youtube.com/v/ICYoxx3BXzg&rel=1" windows down

Last edited by predestyned; 11-06-2007 at 04:29 PM.
Reply With Quote
  #36 (permalink)  
Old 11-06-2007, 11:50 PM
Zangoose GD3 Blue's Avatar
Member
iTrader: (1)
 
Join Date: Aug 2007
Location: New York LONG ISLAND
Posts: 2,456
Rep Power: 73857
Zangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to live
Send a message via AIM to Zangoose GD3 Blue
Quote:
Originally Posted by predestyned View Post
check it out k&n typhoon s.r.i. megan header/midpipe/axleback
" http://www.youtube.com/v/sfECunpy5_I&rel=1" windows up
http://www.youtube.com/v/ICYoxx3BXzg&rel=1" windows down
OMFG dude thanx... on the second video holy sh!t it sound so good when you were down sh!fting... thanx man really appreciated
__________________
07 Honda Fit sport 5Speed M/T aka WARTURTLE
SLW FTW
Mods Installed--> Suspension completed ( track ready)/ Engine 70% done/ Comestic ( well who cares lol )

Now: Building Custom Turbo 60% completed....

Reply With Quote
  #37 (permalink)  
Old 11-07-2007, 04:39 PM
predestyned's Avatar
Member
iTrader: (0)
 
Join Date: Sep 2007
Location: georgia
Posts: 39
Rep Power: 0
predestyned is an unknown quantity at this point
thnx man

Quote:
Originally Posted by Zangoose GD3 Blue View Post
OMFG dude thanx... on the second video holy sh!t it sound so good when you were down sh!fting... thanx man really appreciated
just watched/listened to your video with the midpipe.. you are gonna be really happy when you install your header. make video when you install it!
Reply With Quote
  #38 (permalink)  
Old 11-08-2007, 12:35 AM
Zangoose GD3 Blue's Avatar
Member
iTrader: (1)
 
Join Date: Aug 2007
Location: New York LONG ISLAND
Posts: 2,456
Rep Power: 73857
Zangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to liveZangoose GD3 Blue relies on Rep Points to live
Send a message via AIM to Zangoose GD3 Blue
Quote:
Originally Posted by predestyned View Post
just watched/listened to your video with the midpipe.. you are gonna be really happy when you install your header. make video when you install it!
yeah def. man cant wait but i just got an email it will be delayed for a couple of days what the crap...
__________________
07 Honda Fit sport 5Speed M/T aka WARTURTLE
SLW FTW
Mods Installed--> Suspension completed ( track ready)/ Engine 70% done/ Comestic ( well who cares lol )

Now: Building Custom Turbo 60% completed....

Reply With Quote
Reply

Tags
2007, bolts, exhaust, fit, good, guide, header, headers, honda, install, installation, installing, megan, specs, torque

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
DC Ceramic Header review Fit of RAGE Fit Exhaust Systems 36 06-15-2009 02:19 AM
Megan Racing Exhaust/Header/Suspension Sale Invision Fit FIT-Vendor Sponsored Group Buys and Sales 74 03-05-2008 10:49 AM
megan racing header michaelfit84 Fit Exhaust Systems 40 05-03-2007 04:33 AM
Defective Header? *Read my rant* Raaaaaaaaaay. Fit Exhaust Systems 59 02-16-2007 04:07 PM

 
Go


All times are GMT -4. The time now is 02:19 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0