What did you do to your GE fit today?
#601
09-10-2009, 11:45 AM
Installed gutter guard for a/c protection. (I already had a few rolls which I think I picked up for free.) Still need to cut off the leftover ziptie bits.
Clean out car, put stuff in car, go run errands.
Clean out car, put stuff in car, go run errands.
#603
09-10-2009, 08:42 PM
Join Date: Dec 2008
Location: Columbus, Ohio
Posts: 1,423
got any pics?
Is it special vinyl so it doesn't burn or discolor?
Is it special vinyl so it doesn't burn or discolor?
#604
09-10-2009, 08:58 PM
I didn't do anything to my car, but someone else did. I parked in my school parking lot, and some adult backed into it. Luckily for me, they left a note on my dash. My Fit was hit right above the wheel well. Since the area is so small, they will have to blend all the way to the front mirror of the car.
#607
09-11-2009, 11:48 AM
installed: oem window visors
picked up: greddy se exhaust & water temp sensor adaptor, defi blue racer water temp gauge
picked up: greddy se exhaust & water temp sensor adaptor, defi blue racer water temp gauge
#608
09-11-2009, 08:52 PM
and post that awesome looking exhaust
anyone else have that issue?
#613
09-11-2009, 11:48 PM
I just did mine yesterday and it came off easily. Have you tried just taking out the bulb instead?
#614
09-11-2009, 11:50 PM
Shoot a little WD-40 on the seal and wiggle it side to side back and forth then pull.... I know it sounds red neck but it works.
#615
09-12-2009, 12:57 AM
Join Date: Dec 2008
Location: Columbus, Ohio
Posts: 1,423
ebay it came with 2 small ones and 2 large ones.
That is a large one.
That is a large one.
#616
09-12-2009, 01:03 AM
do you mean just taking the bulb out while it's still plugged?
#617
09-12-2009, 01:21 AM
SE vs. Stock:
on the fit:
i was going to do a install write up but w/ pics but it is pretty easy.
so here is a quick write up:
1. raise the back right of the fit and remove the wheel
2. unbolt the stock exhaust (12mm)
3. remove the stock exhaust from rubber hangers (leave the rubber hangers on the car)
4. put the SE exhaust on the hangers
5. bolt the SE to the mid-pipe (will need extened 12mm & normal 12mm)
hope that helps
#619
09-12-2009, 12:20 PM
the defi gauges will be installed sometime next week i hope, juss need a few more things for the install but here is the exhaust which i installed today as well:
SE vs. Stock:
on the fit:
i was going to do a install write up but w/ pics but it is pretty easy.
so here is a quick write up:
1. raise the back right of the fit and remove the wheel
2. unbolt the stock exhaust (12mm)
3. remove the stock exhaust from rubber hangers (leave the rubber hangers on the car)
4. put the SE exhaust on the hangers
5. bolt the SE to the mid-pipe (will need extened 12mm & normal 12mm)
hope that helps
SE vs. Stock:
on the fit:
i was going to do a install write up but w/ pics but it is pretty easy.
so here is a quick write up:
1. raise the back right of the fit and remove the wheel
2. unbolt the stock exhaust (12mm)
3. remove the stock exhaust from rubber hangers (leave the rubber hangers on the car)
4. put the SE exhaust on the hangers
5. bolt the SE to the mid-pipe (will need extened 12mm & normal 12mm)
hope that helps