What did you do to your GE fit today?
Member
Joined: Aug 2009
Posts: 351
From: philadelphia, pa
Installed gutter guard for a/c protection. (I already had a few rolls which I think I picked up for free.) Still need to cut off the leftover ziptie bits.
Clean out car, put stuff in car, go run errands.
Clean out car, put stuff in car, go run errands.
Member
Joined: Aug 2009
Posts: 175
From: Mtn. View, CA
I didn't do anything to my car, but someone else did. I parked in my school parking lot, and some adult backed into it. Luckily for me, they left a note on my dash. My Fit was hit right above the wheel well. Since the area is so small, they will have to blend all the way to the front mirror of the car.
Member
Joined: Feb 2009
Posts: 139
From: Winnipeg, Manitoba, Canada
and post that awesome looking exhaust
anyone else have that issue?
Member
Joined: Sep 2009
Posts: 60
From: Carson, CA
I just did mine yesterday and it came off easily. Have you tried just taking out the bulb instead?
do you mean just taking the bulb out while it's still plugged?
Member
Joined: Dec 2008
Posts: 244
From: Norwalk, CA
SE vs. Stock:
on the fit:
i was going to do a install write up but w/ pics but it is pretty easy.
so here is a quick write up:
1. raise the back right of the fit and remove the wheel
2. unbolt the stock exhaust (12mm)
3. remove the stock exhaust from rubber hangers (leave the rubber hangers on the car)
4. put the SE exhaust on the hangers
5. bolt the SE to the mid-pipe (will need extened 12mm & normal 12mm)
hope that helps
Member
Joined: Feb 2009
Posts: 139
From: Winnipeg, Manitoba, Canada
the defi gauges will be installed sometime next week i hope, juss need a few more things for the install but here is the exhaust which i installed today as well:
SE vs. Stock:
on the fit:
i was going to do a install write up but w/ pics but it is pretty easy.
so here is a quick write up:
1. raise the back right of the fit and remove the wheel
2. unbolt the stock exhaust (12mm)
3. remove the stock exhaust from rubber hangers (leave the rubber hangers on the car)
4. put the SE exhaust on the hangers
5. bolt the SE to the mid-pipe (will need extened 12mm & normal 12mm)
hope that helps
SE vs. Stock:
on the fit:
i was going to do a install write up but w/ pics but it is pretty easy.
so here is a quick write up:
1. raise the back right of the fit and remove the wheel
2. unbolt the stock exhaust (12mm)
3. remove the stock exhaust from rubber hangers (leave the rubber hangers on the car)
4. put the SE exhaust on the hangers
5. bolt the SE to the mid-pipe (will need extened 12mm & normal 12mm)
hope that helps
