What did you do to your GE fit today?
Put numbers on it. Today was a fun runs day at Candlestick with the BMWCCA. My best run was 55.9, ftod was 48-something from a guy with a Formula Ford, while the fastest BMW time was 51-something.
Last edited by Cliff; Apr 7, 2013 at 10:39 PM.




been lurking the site for about a month and fig'd it was time for make a post. had the car for a month and she has about 700 miles under her belt. decided it was time to install the wheels/tires and suspension today also reset the alignment. gonna raise the front up a hair to get it a little more level but im happy with the height and ride. lots more to come.
I looked it up and also looked on back of my silverstar bulbs
they are made by osram. They are the same bulb with a slight blue tint in difference
they are made by osram. They are the same bulb with a slight blue tint in difference
There weren't any Fit wheels with audio controls on ebay, plus the DIY mentions buying a used Civic wheel for the controls since there are more of them around. If I can't get the wheel to work it's no big deal as I can transfer the audio controls over to my stock wheel

nice tire choice!
I see. You could just buy it from Honda tho...if you wanted to pay out the ass!



been lurking the site for about a month and fig'd it was time for make a post. had the car for a month and she has about 700 miles under her belt. decided it was time to install the wheels/tires and suspension today also reset the alignment. gonna raise the front up a hair to get it a little more level but im happy with the height and ride. lots more to come.


its on d2 coilovers. the fronts could go way lower and the rears still have the spring seat and the one collar the lines up the springs all the way down. fronts have smaller upper strut bolts all the way pushed in and i still only have -2.5 of camber in the front, wtf. i barely clear 205-40-17s on 17x7 +40's with no fender mods at this height.
Last edited by kudakev615; Apr 8, 2013 at 08:37 PM.
My Modulo ducktail came in yesterday, had them wrapped in Black matte vinyl and put some 3M double tapes, and installed the wing.The fitment is top-notch, no hassle.

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us
Last edited by kloopon; Apr 9, 2013 at 03:36 AM.




