What did you do to your GE fit today?
I replaced windshield wipers with PIAA silicone, replaced all my bulbs with LED bulbs all throughout my exterior: headlights, fogs, side markers, turn signals, brakes, front and back. Added load resistors to turn signals to avoid hyperflash because LED uses much less power (I know, I should use a relay instead of resistors, but I've been too lazy lately to do the research and I had spare load resistors)
Yesterday one of the drive shafts on my 2009 manual transmission Fit broke in the middle of an intersection. There was a clunk and I couldn't propel my car anymore. Had it towed to the dealership less than 10 minutes away. Found out by the end of the day what happened and why. There's a brand new as of December 2020 recall on these drive shafts due to a processing problem of the coating. I guess I beat out the recall notices due to go out in February. But I get a loaner of a Honda Insight until they fix it.
Did a custom brake callipers covers yesterday and they look amazing. Mine is JDM RS version ,It has all wheel disk brakes already. So braking power is amazing. Just it needed was the looks which is now done. Check them out.
Convert those cheap brake covers into something amazing!
Check the whole process video down here
Specs: k24a2@GT3076R Turbo, 320 WHP right now on low boost.
Coming next will be Spirited driving and pulls video and i intend on making a complete guide how to do the k-swap from scratch to working reverse camera,especially the wiring portion which is most difficult.Stay tuned for that
Convert those cheap brake covers into something amazing!
Check the whole process video down here
Coming next will be Spirited driving and pulls video and i intend on making a complete guide how to do the k-swap from scratch to working reverse camera,especially the wiring portion which is most difficult.Stay tuned for that
Last edited by Fit Hybrid RS 2012; 03-18-2021 at 10:21 PM.
it would require a different grille, the second gen got a facelift in 2012, making the grille larger than the first edition second gens.
Yes, it is a direct fit.
Installed fander flares as my 215/55/16 were rubbing badly. In rear fender rolling worked but in front the fender walls are so thin,they went back after two-three days. So i had to cut them and install the flares.
To watch how i did,Here is video:
To watch how i did,Here is video:
Installed fander flares as my 215/55/16 were rubbing badly. In rear fender rolling worked but in front the fender walls are so thin,they went back after two-three days. So i had to cut them and install the flares.
To watch how i did,Here is video: https://youtu.be/FEC4bAgM41E
To watch how i did,Here is video: https://youtu.be/FEC4bAgM41E
i have 225/25/17 and 205/50/16 for those purposes. But this is my family car and roads here are bumpy,crappy and a lot of nails on them,so these street cheap tyres are just a sacrifice :P
Add custom callipers like i did