Automatic Locks
in your owner's manual, there is a quick guide. it lists all the possibilities available for the door locks. I never disabled them, but do have the doors lock when I hit 10mph. then they unlock when the car is in park.
From the OM (Pages 83-87):
To turn off the Auto Door Lock
modes:
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and open the driver's door.
3. Push and hold the front of the
master door lock switch on the
driver's door until you hear a click
(after about 5 seconds).
4. Release the switch, and within 5
seconds, turn the ignition switch to the
LOCK (0) position.
modes:
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and open the driver's door.
3. Push and hold the front of the
master door lock switch on the
driver's door until you hear a click
(after about 5 seconds).
4. Release the switch, and within 5
seconds, turn the ignition switch to the
LOCK (0) position.
To turn off the Auto Door Unlock
modes:
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and open the driver's
door.
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click,
and after about 5 seconds, you will
hear another click.
4. Release the switch, and within 5
seconds, turn the ignition switch to
the LOCK (0) position.
modes:
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and open the driver's
door.
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click,
and after about 5 seconds, you will
hear another click.
4. Release the switch, and within 5
seconds, turn the ignition switch to
the LOCK (0) position.
Last edited by loubob57; Jun 8, 2010 at 09:37 AM.
Thread
Thread Starter
Forum
Replies
Last Post
1775
2nd Generation (GE 08-13)
1
Sep 7, 2018 10:39 AM





