Alpine ILX-007 (Apple CarPlay) is installed
Rear camera has a wiring problem I have not resolved and would very much appreciate help with.

Here is a link to the wiring as it exists in the car now:
https://drive.google.com/file/d/0B5K...ew?usp=sharing

I'm guessing that the problem is connecting the video signal correctly to the camera, but I suppose other errors may be at play. My pain started when I was unable to pass the plugs through the rubber hose, which prompted me to cut them off from each side. Now I have 3 wires on one side and 2 wires on the other, and no idea what should connect to what. I did try just touching wires in different combinations but was never able to receive a video on the Alpine.

Thanks!