Help!
#1
Help!
while disassembling, i've some how manage to strip the top of the struts. Now i can't finish the passenger side. Can anyone think of a solution to this problem?
thanks, i'm putting everything back together for now.
thanks, i'm putting everything back together for now.
#3
This has happened to me before. If you have an impact wrench, you can get the nut going on the threads. Get the nut past top where you can grip the top of the threads with some vice grips, then continue tightening the nut with a wrench. (at least this worked for me)
Another thought would be to weld/glue/epoxy an allen head bit in there, then you could grip it with vice grips and tighten the nut with a wrench.
Good luck bro!
Another thought would be to weld/glue/epoxy an allen head bit in there, then you could grip it with vice grips and tighten the nut with a wrench.
Good luck bro!
Last edited by drumsauce; 05-16-2011 at 10:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
hialoooha
2nd Generation GE8 Specific Suspension & Brakes Sub-Forum
9
08-18-2014 11:20 PM
apexanimal
Fit Suspension & Brake Modifications
12
03-23-2014 02:45 PM