'11 GE8 Sport SSM with factory upgrade alloys

Reply Subscribe

Thread Tools

Search this Thread

Sep 17, 2012 | 03:24 PM

#21

andvari101

Thread Starter

Member

Joined: Aug 2012

Posts: 24

From: McKinney, TX

Quote:

Originally Posted by kenchan

swifts are great! i run them on my car.

5mm can be okay if you have at least 10mm of thread, but 10mm spacers are dangerous without longer studs.

This is the thread I was reading from:
Add offset/spacer to stock wheels? - Unofficial Honda FIT Forums

Hootie, DSM, and Jodele drop some knowledge for potential 10mm spacers by pressing out the studs and putting in longer ones.

I'd probably start with 5mm and see if that fits my tastes before jumping to the effort of putting in 10mm (vs just buying different wheels with offset).

Sep 17, 2012 | 04:05 PM

#22

kenchan

Official Fit Blogger of FitFreak

iTrader: (4)

Joined: Dec 2007

Posts: 20,288

From: OG Club

Quote:

Originally Posted by andvari101

if you're really committed on the stock wheels you can also get these FIC spacers with 10mm widths (includes centering ring unlike kics on 10mm) and cut your stock studs shorter.
http://www.evasivemotorsports.com/mm...ry_Code=FIC-WS
you can still reverse it by installing new studs later if you change your mind.

it's up to you. GL!