How to Install Variable Intermittent Wipers
#1
How to Install Variable Intermittent Wipers
Hello
I have plan to Modify by Install Variable Intermittent Wipers.
I checked that can use this parts from Honda HR-V
But I didn't know how to install
It need wiring or not.
Any one know?
I have plan to Modify by Install Variable Intermittent Wipers.
I checked that can use this parts from Honda HR-V
But I didn't know how to install
It need wiring or not.
Any one know?
#4
Novel feature, I normally bump the stalk for a quick wipe, but having an adjustable interval is sweet. Exactly what parts did you look at? Is the interval circuit contained in the staulk assembly itself? I dont know myself, but if it is should be an easy swap. It could also very well be a function of the ICM too, I've seen stranger more simple functions managed through the CANBUS network.
#5
I don't know about this too much
but I seen honda fit (GE) can swap with Honda CRV parts and use 1line electric to connect fusebox.
So I surly it can use parts from Honda HRV but how to find electric line to connect it
but I seen honda fit (GE) can swap with Honda CRV parts and use 1line electric to connect fusebox.
So I surly it can use parts from Honda HRV but how to find electric line to connect it
#6
#7
Bump: I really hate the standard one speed intermediate wiper setting that it came with.
I found the part that that would fit to the "2016 EX-L FIT" (35256-TVO-A11). The CR/HR-V's have them on their EX's, and the LX has same as the EX-L Fit (35256-TOA-S01).
It seems like a simple pull out and push back in type of DIY, but it seems that some special wiring is involved.
The dealer is scared to make any recommendations of how and also called HONDA USA. Supposedly there is a Tech phone number to call, but only for the dealers.
Has anyone successfully installed an IW assembly for the 2016 FIT?
I found the part that that would fit to the "2016 EX-L FIT" (35256-TVO-A11). The CR/HR-V's have them on their EX's, and the LX has same as the EX-L Fit (35256-TOA-S01).
It seems like a simple pull out and push back in type of DIY, but it seems that some special wiring is involved.
The dealer is scared to make any recommendations of how and also called HONDA USA. Supposedly there is a Tech phone number to call, but only for the dealers.
Has anyone successfully installed an IW assembly for the 2016 FIT?
Thread
Thread Starter
Forum
Replies
Last Post
Honda auto parts
Fit Engine Modifications, Motor Swaps, ECU Tuning
2
10-27-2009 07:41 PM
ghg78
Fit Suspension & Brake Modifications
29
07-11-2009 09:45 PM