Hi,

I am after some more info on the 2017 model Jazz/ Fit VTi-S.
Having done a bit of research, I have discovered

- The physical connector is different from most available
- The wiring colours are also different.



There is also an 8 pin connector that seems to be for the camera.





Does anyone have the original wiring diagrams for this car.

 

Initial pic of 8P conndctor

 

Update for this weekend

Working components :
Power
Speakers
Park brake switch
Reverse Sense

Paritally working :
Steering Control

Not working :
Rear Camera

The steering wheel controls can be seen to operation :
When the old head unit was plugged in the voltage varied depending on the button.
When not plugged in I get a varying resistance between the signal wire (Pink pin 5) and what I
gather is remote ground (White pin 20)

Head deck is Kenwood DMX 8019S
According this Kenwood info it should just work.
https://www.kenwood.com/nz/car/visual_navigation/oem/


Does anyone have any trick to making it work?