Help : HKS Turbo Kitt Vs Top Fuel Turbo Kitt for FIT
#1
Help : HKS Turbo Kitt Vs Top Fuel Turbo Kitt for FIT
sorry guyz i have a question need to ask to anybody who knows
according to hyper REV magazine
HKS turbo kitt with 0,35 bars Boost can reach 150 Hp
and Top Fuel Turbo Kitt with 0,5 Bars Boost reach 148 Hp
correct me if im wrong
does that means
HKS Turbine is bigger than Top Fuel Turbine, so to reach the same Horse Power, Top Fuel Turbo kitt need higher boost ???
i really do need this info
currently
im using Top Fuel turbo kitt on my CVT tranny
i dont want any overboost which could crash my tranny
according to hyper REV magazine
HKS turbo kitt with 0,35 bars Boost can reach 150 Hp
and Top Fuel Turbo Kitt with 0,5 Bars Boost reach 148 Hp
correct me if im wrong
does that means
HKS Turbine is bigger than Top Fuel Turbine, so to reach the same Horse Power, Top Fuel Turbo kitt need higher boost ???
i really do need this info
currently
im using Top Fuel turbo kitt on my CVT tranny
i dont want any overboost which could crash my tranny
#2
your getting confused, lol
boost does not break trannies
HP does nto break trannies
torque does....
so your question is completely irrelevant.
what you need to find out is how much torque the cvt tranny can handle.
however, im 99% sure the turbo that comes with th ehks kit and the top fuel kit have the same specs. the wastegate is most likely the only difference.
boost does not break trannies
HP does nto break trannies
torque does....
so your question is completely irrelevant.
what you need to find out is how much torque the cvt tranny can handle.
however, im 99% sure the turbo that comes with th ehks kit and the top fuel kit have the same specs. the wastegate is most likely the only difference.
#3
your getting confused, lol
boost does not break trannies
HP does nto break trannies
torque does....
so your question is completely irrelevant.
what you need to find out is how much torque the cvt tranny can handle.
however, im 99% sure the turbo that comes with th ehks kit and the top fuel kit have the same specs. the wastegate is most likely the only difference.
boost does not break trannies
HP does nto break trannies
torque does....
so your question is completely irrelevant.
what you need to find out is how much torque the cvt tranny can handle.
however, im 99% sure the turbo that comes with th ehks kit and the top fuel kit have the same specs. the wastegate is most likely the only difference.
so do any of u knows our maximum torque that our cvt holds ?
say,
im about to sett my boost to 5-6 Psi
my boost still spike up to 7,4 psi
i already losen the spring wastegate and set lower on my boost controler still cant get it down to 5 psi
need help....
should i loosen more of the springs ?
#4
You should really stop worrying about 2 hp, from what you've been doing it sounds like you'll end up doing more harm that good. Find a reputable tuner near you and have them tune the car, tell him what you're looking to do and he can probably make it happen.
Thread
Thread Starter
Forum
Replies
Last Post
200psGD3
Fit Engine Modifications, Motor Swaps, ECU Tuning
19
02-17-2008 12:07 PM
jits14
Fit Engine Modifications, Motor Swaps, ECU Tuning
3
12-07-2006 11:02 PM
vividjazz
Fit Engine Modifications, Motor Swaps, ECU Tuning
37
03-18-2006 09:54 AM