K20Z3 swap into my AT fit?
#1
K20Z3 swap into my AT fit?
just wondering will there any problems with this set up to my AT fit? or are there anything i need to be aware of?
Engine
Transmission
shifter assembly and cables
throttle cable
fuel line
brake booster line
purge line
clutch lines from master to slave cylinder
high pressure power steering hose
power steering return line
ac line from compressor to condenser
axles
radiator and fans (stock will fit but need trimming)
upper and lower radiator hoses
any comment will help thank you !
Engine
Transmission
shifter assembly and cables
throttle cable
fuel line
brake booster line
purge line
clutch lines from master to slave cylinder
high pressure power steering hose
power steering return line
ac line from compressor to condenser
axles
radiator and fans (stock will fit but need trimming)
upper and lower radiator hoses
any comment will help thank you !
#6
you'll need MT cluster and ecu, and then the k20 ecu, run dual ecu's /w kpro.
since there's mroe weight, upgrade the brake system while ur at it, rotors, pads, lines, and if you need more, then get a bbk and/or rear brake conversion.
hasport has a k-series mount conversion, and you'll need a custom header
you'll also need to notch the subframe for transmission mounting
post pics of the build if u can, im sure people would be interested in the progress/build
since there's mroe weight, upgrade the brake system while ur at it, rotors, pads, lines, and if you need more, then get a bbk and/or rear brake conversion.
hasport has a k-series mount conversion, and you'll need a custom header
you'll also need to notch the subframe for transmission mounting
post pics of the build if u can, im sure people would be interested in the progress/build
Thread
Thread Starter
Forum
Replies
Last Post
91CRXisGo
Fit Engine Modifications, Motor Swaps, ECU Tuning
8
02-05-2014 08:36 AM
k-alt
Fit Engine Modifications, Motor Swaps, ECU Tuning
18
03-29-2011 09:29 PM
FELIXY69
Fit Engine Modifications, Motor Swaps, ECU Tuning
11
07-29-2009 10:15 AM