Bolt on Turbo Kit for Brio L12B I Vtec engine
#1
Bolt on Turbo Kit for Brio L12B I Vtec engine
Hi,
Am looking for bolt on performance mods for the 2011 Honda Brio. The car that is sold in India comes with the 1.2 ltr L12B Ivtec engine.
Primarily looking for the following
1> Bolt on Turbo kit
2> Forged Internals ( Pistons, rods)
3> Suspension Upgrade
4> Brake Upgrade ( maybe performance pads and rotors to start with)
5> Stand Alone ECU
Can somebody gimme some website links or put me onto someone who could help me in Thailand or Malaysia preferably.
Thanks in advance.
Jignesh
__________________
Am looking for bolt on performance mods for the 2011 Honda Brio. The car that is sold in India comes with the 1.2 ltr L12B Ivtec engine.
Primarily looking for the following
1> Bolt on Turbo kit
2> Forged Internals ( Pistons, rods)
3> Suspension Upgrade
4> Brake Upgrade ( maybe performance pads and rotors to start with)
5> Stand Alone ECU
Can somebody gimme some website links or put me onto someone who could help me in Thailand or Malaysia preferably.
Thanks in advance.
Jignesh
__________________
Last edited by Viperjng; 09-28-2012 at 11:52 PM.
#3
I'll try to answer some of your questions
1. I have never seen a bolt on turbo kit for that version of the L motor
2. See answer 1.
3. Suspension Upgrade is a pretty basic question... You could do all kinds of stuff - coil overs, springs, sway bars, bracing...
4. Do a search for rear disc brakes
5. I'm not aware of a plug and play standalone ecu for the FIT. You could do something like a Haltech standalone ecu and get all new sensors. It's a lot of work.
Honestly it sounds like doing a K20 swap would be more achievable than modifying the motor currently in your fit.
1. I have never seen a bolt on turbo kit for that version of the L motor
2. See answer 1.
3. Suspension Upgrade is a pretty basic question... You could do all kinds of stuff - coil overs, springs, sway bars, bracing...
4. Do a search for rear disc brakes
5. I'm not aware of a plug and play standalone ecu for the FIT. You could do something like a Haltech standalone ecu and get all new sensors. It's a lot of work.
Honestly it sounds like doing a K20 swap would be more achievable than modifying the motor currently in your fit.
Thread
Thread Starter
Forum
Replies
Last Post
silverish
Fit Engine Modifications, Motor Swaps, ECU Tuning
37
06-16-2014 01:25 PM
Fit*est
2nd Gen GE8 Specific Fit Engine Modifications, Motor Swaps, ECU Tuning Sub-Forum
3
07-01-2012 07:57 PM