crazy taillight idea
#1
crazy taillight idea
so i was looking on the noblesse site
their fit has these
i got led tail lamps too
how can i make mine like that ?
if i just take the bulbs out will it cut out all the other lights too because their current might be connected ?
getto idea
if i pain the bulbs black, will it work ?
does led have much heat that will melt the paint ???
thanks
their fit has these
i got led tail lamps too
how can i make mine like that ?
if i just take the bulbs out will it cut out all the other lights too because their current might be connected ?
getto idea
if i pain the bulbs black, will it work ?
does led have much heat that will melt the paint ???
thanks
Last edited by FELIXY69; 08-01-2007 at 06:12 PM.
#2
That is a cool idea! I'm not sure if they would be in series, I'm almost sure they are in parallel, so by simply severing the ones power to the ones you want darkened, it shouldn't affect the whole array...it's kind of like those other cars out there with the burned out LED 3rd Brake Lights...there are one or two burnt out in the middle of the string of lights...
#4
y wait when u can diy now.
i toke the tail light apart last nite...i hate wires so i dunno how to explaine it
but i'll take a picture of it tonite for all of our discusion
thanks
i toke the tail light apart last nite...i hate wires so i dunno how to explaine it
but i'll take a picture of it tonite for all of our discusion
thanks
#5
I'm pretty sure you can just sever the connections and leave the LED's in there...that way, if you ever want the original look back, you can just solder the wires back together...
#10
i think that little modification has a hard way to do it well. For me, i think you could take out the bulbs you dont want, but do not cut wires, unless you cut them, and then unite the cables with the ones you do want to light up. Painting, or even breaking them would not work, since paint could be weak, and because theyre all linked together, if one burns out or you break those bulbs you dont want to light up, the whole thing turns off, IMO
#11
Can you just put tin foil over the ones you dont want to show?
I just got the JDM LED tails and it looks entirely doable! or just put a black cap on them (I just think the foil will look like less of a void when you look at them with out the lights on)
or just foil tape...for ducting?
I just got the JDM LED tails and it looks entirely doable! or just put a black cap on them (I just think the foil will look like less of a void when you look at them with out the lights on)
or just foil tape...for ducting?
Last edited by Snap Fit; 01-02-2008 at 03:38 PM. Reason: I DONT NEED NO STINKIN REASONS!!!
#13
Looks like a series configuration. did cutting the wires turn off individual bulbs or did the whole unit lose power?
Last edited by I<3GD3; 01-05-2008 at 06:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Stephen Lawson
Fit Interior & Exterior Illumination
12
03-12-2021 12:20 PM
bsphung117
Fit Interior & Exterior Illumination
6
11-14-2008 12:03 AM