i recently did changed my signal bulbs to switchback led bulb (stays on white, then switches to amber when turn signal is on) it requires a double filament socket which our fits do not have so i did some custom modding...i used a universal double filament socket and tapped it to the existing socket & parking wire. i am positive that i am the 1st fit to do this mod. here are some pics i took earlier before it started to rain.

here is just driving light switched on (parking + ccfl angeleyes + led strip + signal)


the new signal (switch back led bulb...requires custom socket modding)


cclf angeleye + parking 5smd led t10 bulb


further back pic





projectors on


passenger


driver


cutoff (im parked at an angle)


vid of the switchback

 

what is all that extra light above your cut off?

 

its cuz i didnt paint the reflectors black..so they light is bouncing off causing the light...

 

Oh no it's glare you better watch before someone here flames ya!

 

Hahahaha aint that true. Lets see how long it take before that happeneds

 

Heres a little trick I learned. If you don't wanna paint your reflectors, but don't want the glare, you can take aluminum tape, fold it on itself (basically sticky part to sticky part) and put it around the back of your projector, where the light is venting out causing the glare and it'll get rid of that. But ya, you should take care of the glare. Kinda defeats the purpose of the projector.

 

Needs more accessory lighting

 

mods: can we ban the OP for making a retrofit with glare above the cutoff?